181 Nut
(7)Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, and plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• No special tubing preparation
• Fair vibration resistance
• Primary uses: automotive and gas control valves
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut onto tube—threads facing end
3. Insert tube into fitting
4. Thread nut into fitting until snug, then 1 1/2 turns
188 Connector (Female Compression x Male Pipe)
(9)Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, and plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• No special tubing preparation
• Fair vibration resistance
• Primary uses: automotive and gas control valves
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut onto tube—threads facing end
3. Insert tube into fitting
4. Thread nut into fitting until snug, then 1 1/2 turns
182 Union (Compression x Compression)
(4)Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, and plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• No special tubing preparation
• Fair vibration resistance
• Primary uses: automotive and gas control valves
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut onto tube—threads facing end
3. Insert tube into fitting
4. Thread nut into fitting until snug, then 1 1/2 turns
189 Elbow (Female Compression x Male Pipe)
(8)Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, and plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• No special tubing preparation
• Fair vibration resistance
• Primary uses: automotive and gas control valves
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut onto tube—threads facing end
3. Insert tube into fitting
4. Thread nut into fitting until snug, then 1 1/2 turns
181SP Nut with Break-Away Sleeve
(4)Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, and plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• No special tubing preparation
• Fair vibration resistance
• Primary uses: automotive and gas control valves
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut onto tube—threads facing end
3. Insert tube into fitting
4. Thread nut into fitting until snug, then 1 1/2 turns
