Products Catalog

WorldWide Electric’s General Purpose Single-Phase motors are suitable for a diverse range of industrial applications. Reduce inventory space by stocking one motor design that meets the needs of a diverse market. Available with bolt-on base plates, and C-Face designs.

Features:
• 1/3-2 HP
• 3600 and 1800 RPM
• 115/208-230 volt
• TEFC enclosure
• 1.15 service factor
• Class F insulation
• C-face - removable base
• Capacitor start / induction run (1/3-1 HP)
• Capacitor start / capacitor run (1.5-2 HP) for reduced amperage and high torque
• Shaft slinger to keep moisture and contaminants from the drive-end bearing

WorldWide Electric’s General Purpose Three-Phase motors are suitable for a diverse range of industrial applications. Reduce inventory space by stocking one motor design that meets the needs of a diverse market. Available with bolt-on base plates, and C-Face designs.

Features:
• Rigid Base: 1/2 - 2 HP; 1800 RPM
• 1/3-3 HP
• 3600 and 1800 RPM
• 208-230/460 volt
• TEFC enclosure
• 1.15 service factor
• Class F insulation
• C-face - removable base
• Shaft slinger to keep moisture and contaminants from the drive-end bearing
• Inverter duty
• Suitable for 50 hz operation with 1.0 service factor

WorldWide Electric’s single-phase jet pump motors can be used to power water well pumps, pools, and more. These motors feature high torque and durability.

Features:
• 1/3-2 HP
• 3600 RPM
• 115-208/230 volt
• TEFC enclosure
• 1.15 service factor
• Class F insulation
• C-face - removable base
• Threaded shaft
• Capacitor start / induction run (1/3-1 HP)
• Capacitor start / capacitor run (1.5-2 HP) for reduced amperage and high torque
• Shaft slinger to keep moisture and contaminants from the drive-end bearing
• Automatic overload

WorldWide Electric’s versatile three-phase jet pump motors are durable and deliver torque that can handle a diverse range of water applications. Some applications include driving pumps for water wells and pool jets.

Features:
• 1/3-2 HP
• 3600 RPM
• 208-230/460 volt
• TEFC enclosure
• 1.15 service factor
• Class F insulation
• C-face - removable base
• Threaded shaft
• Shaft slinger to keep moisture and contaminants from the drive-end bearing
• Inverter duty
• Suitable for 50 hz operation with 1.0 service factor

WorldWide Electric’s Permanent Magnet DC motors are used to regulate or change speed on various applications. These motors allow end-users to use an AC voltage source with our controller to vary the speed as your application requires. These motors come with an extra set of brushes and springs for 90 & 180 volt motors. These brushes are rated for 2500 hours, so you get 5000 hours worth of brush life with the extra set of replacement brushes. WorldWide Electric also has NEMA 4 DC controllers to operate these motors at very competitive pricing.

Features:
• 1/4-2 HP
• 1800 RPM
• 90, 180, 12 and 24 volt
• TENV enclosure (1/4-1/2 HP)
• TEFC enclosure (3/4-2 HP)
• 1.0 service factor
• Class F insulation
• C-face - removable base
• 20:1 speed range at constant torque
• High starting torque
• Extra set of brushes and brush springs included
• 12 volt and 24 volt models used in applications where low voltage DC power is supplied by batteries or generators

Our Stainless Steel / Washdown Duty motors are rated for a 1.15 service factor (1.0 w/ AC Drive), feature a TEFC enclosure (rated IP56), and double lip seals on both ends of the motor with an additional shaft slinger for added protection. O-rings are also installed on end bells & through bolts. They come with a 304 stainless steel shell frame, stainless steel shaft, and a watertight cord connector with a junction box.

Features:
• 1/3-2 HP
• 3600 and 1800 RPM
• 208-230/460 volt
• TEFC enclosure - IP56 degree of protection
• 1.15 service factor
• Class F insulation
• C-face - rigid base and round body
• 304 stainless steel frame, end bracket and junction box
• Stainless stell shaft
• Double lip seals on both ends of the motor with an additional shaft slinger on the drive-end
• O-rings installed on endbells to eliminate moisture
• Pre-installed watertight, stainless cord connector
• Inverter duty
• Suitable for 50 hz operation with 1.0 service factor
• Three-Phase

Our Stainless Steel / Washdown Duty-TENV motors are rated for a 1.15 service factor (1.0 w/ AC Drive), feature a TENV enclosure (rated IP56), and double lip seals on both ends of the motor with an additional shaft slinger for added protection. O-rings are also installed on end bells & through bolts. They come with a 304 stainless steel shell frame, stainless steel shaft, and a watertight cord connector with a junction box.

Features:
• 1/3-1 HP
• 1800 RPM
• 208-230/460 volt
• TENV enclosure
• 1.15 service factor
• Class F insulation
• C-face - rigid base and round body
• 304 stainless steel frame, end bracket and junction box
• Stainless steel shaft
• Double lip seals with an additional shaft slinger on the drive-end
• O-rings installed on endbells to eliminate moisture
• Pre-installed watertight, stainless cord connector
• Inverter duty
• Suitable for 50 hz operation with 1.0 service factor
• Three-Phase