129P01 Male Push-On Brass Hose Barbs
(14)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P02 Male Pipe Swivel Push-On Brass Hose Barbs
(6)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P03 NPSM Push-On Brass Hose Barbs (Barb x NPSM)
(5)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
(13)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P05 JIC Flare Push-On Brass Hose Barbs (Barb x 37° Flare)
(13)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P06 Inverted Flare Swivel Push-On Brass Hose Barbs (Barb x Inverted Flare Swivel)
(12)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P07 Female Push-On Brass Hose Barbs (Barb x Female Pipe)
(15)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P08 Push-On Brass Hose Barbs NPSM Ball End
(10)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P09 Push-On Brass Hose Barbs NPSM Gasket Seat
(10)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P010 Push-On Brass Hose Barbs Dual Seat Flare
(9)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P011 Push-On Brass Hose Barbs Female SAE Swivel
(5)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P012 Push-On Brass Hose Barbs Female JIC Swivel
(3)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P013 Push-On Brass Hose Barbs Inverted Flare
(6)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P014 Push-On Brass Hose Barbs Splicer
(6)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)
(6)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
129P020 Push-On Brass Hose Barbs (Barb x Male Pipe Elbow)
(13)Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.
To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose
