HDL Series 3"-8" Vacuum Discharge Oil Mist Eliminators
(5)
Features:
• Minimum 99.97% D.O.P.on 0.3 um diameter particles
• Positive sealing O-ring seal system
• Temperature (continuous operating) 68° F ( 20° C) to 180° F (80° C)
• Filter change out differential: 2.5 psid
• ppmw = parts per million by wt.
• Internal 'mist coalescing' stages in single element design with proprietary fast flow oil drainage design
• Pleated filter medium increases surface area which allows low velocity separation uf ultra-fine oil mist
• High gravimetric efficiency means low oil carryover
• 1.47 PSID back pressure drop at rated flow when saturated
• 0-5 PSIG operating, 10 PSIG proof pressure
HDL Series 1"-2.5" Vacuum Discharge Oil Mist Eliminators
(8)
Features:
• Minimum 99.97% D.O.P.on 0.3 um diameter particles
• Increased surface area in a given volume allows low velocity separation of ultra fine oil mist
• Low pressure drop
• Large oil catching efficiency and easy field cleaning
• Brazed fittings for high vacuum duty
• Positive sealing O-ring seal system
• Seamless drawn one piece carbon steel canister
• Temperature (continuous operating) 68° F ( 20° C) to 180° F (80° C)
• Filter change out differential: 2.5 psid
• ppmw = parts per million by wt.
• Handles hot air and oil mist from unload cycle of reciprocating/piston compressor
• High DOP efficiency means low oil carryover
• Rugged construction
• 1/4" Drain tap standard
HDL Series 1to2.5 Vacuum Discharge Oil Mist Eliminators image.jpg
