Search Catalog
      GO   
 All Categories    Flat Blade Diverter Valve
All Categories > Dry Bulk Loading and Dust Control > Dry Bulk Loading Valves > Diverter Valves > Flat Blade Diverter Valve > Item # FBOD30-06  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # FBOD30-06, Flat Blade Diverter Valve







Flat blade diverter valves are designed to direct product flow from outlets of dry bulk storage bins, silos, conveyors, gravity flow chutes and other discharge points. DCL’s FBD housing is constructed of plate steel with cross member supports on larger sizes. The reinforced blade pivots on two flanged bearings, allowing it to open and close with ease.


Flat blade diverter valves can be actuated in many ways; pneumatically for fast action, hydraulically for power, electrically for convenience and manually with a chain wheel or lever. The seals on the flat blade diverter are designed to eliminate product leakage when the blade is in the diverted position. The seals are located at the top, sides and bottom of the blade. Blade seals are selected according to the material being handled and are available to suit any application.


DCL offers a large selection of flat blade diverter valves from 6 inches [152 mm] square up to 36 inches [914 mm] square. Flat blade diverter valves are also available in sizes larger than 36 inches [914 mm] and in special configurations including hardened liners.


The FBOD flat blade offset diverter valve is configured to direct the product flow straight through or to one side of the diverter. Typical product outlet offsets are 30 or 45 degrees off center. One blade and actuator is used on this diverter valve.


FBSD flat blade symmetric diverter valves have two product outlets, each 30 or 45 degrees off center. One blade and actuator is used on this diverter valve.


The FBTV flat blade triverter valve has one inlet and three outlets. The two side outlets are 30 or 45 degrees off the center outlet. Two blades and actuators are used on this valve.


A choice of construction materials allows you to effectively handle all types of products – fine, granular, lumpy, abrasive and corrosive – and difficult dusty or sanitary applications. You can also choose from the electrical options that are best suited for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.



 







Specifications

Housing Material

Mild Steel (Abrasion resistant or stainless steel are optional)

Weight lbs.

132

Manufacturer

Dust Control and Loading Systems, Inc.


 MORE IMAGES 

·  Flat Blade Diverter Valves Image (2)


 DOWNLOADS 

FBD Flat Blade Diverter Valve Brochure
(PDF, 928KB)

Aeration Conveying Brochure
(PDF, 925KB)



 Customers also viewed... 


Model FS Flow Switch
Model FS Bulk Material Flow Switch


VB Bin Aerators
VB Series Vibrating Bin Aerators

more available ..


 Customers also viewed... 


120 Digital Weight Indicator
120 Digital Weight Indicator


120 Plus Digital Weight Indicator
120 Plus Digital Weight Indicator

more available ..


 Customers also viewed... 


Magnetic Rail Flag Holder
Warning Flags & Flag Holders


Pulling & Positioning Railcars
Railcar Pulling Power Winches

more available ..