The Dust Detect 1000 is a single device dust detector that has been specifically designed to continuously monitor the flow of particulate emissions from small stacks and emission points being passed through an air filtration system. It easily installs in the exhaust ductwork and can be used with several types of filtration systems. The probe on the Dust Detect 1000 is able to recognize abnormal particulate levels outside user-defined preset parameters and initiates an alarm when changes in emission exceed these levels.


Dust Detect 1000 utilizes triboelectric technology, whereby the collision and interaction of particles with the probe rod cause a small electrical charge transfer to occur. This small electrical charge provides a signal that is monitored by the electronics. It is designed to prevent false readings, even if an accumulation of dust forms on the sensor rod. Emissions readings are averaged, not smoothed, to eliminate false alarms. It can be set to make pre-warning indicator alerts to potentially hazardous situations or be set to provide an instantaneous alarm or one-minute averaged readings.


Features:
• Complies with US and International EPA regulations
• Emission readings are averaged, not smoothed, to eliminate false alarms
• Pre-warning indicator alerts to potentially hazardous situations
• Instantaneous alarm or one minute averaged readings
• Easy set-up
• Two SPDT relay outputs


Specifications:
• Power Requirements: 115 VAC, 50/60 Hz ±15%, 5 VA, 230 VAC optional
• Output Relay: Two SPDT 10 Amp relays (warning & alarm)
• Ambient Temp: -25°F to +160°F (-32°C to +71°C)
• Process Temp: Up to 250°F (121°C)
• Pressure: 500 PSI
• Housing Enclosure: Cast aluminum, USDA approved powder coat finish
• Mounting: 1-1/4” NPT or 3/4” NPT 316 SS
• Standard: 1-1/4” NPT 316 stainless steel & sanitary flange optional
• Alarm: Dual alarm (alarm is 2x pre-alarm) switch selectable for instantaneous or one minute averaged
• Sensitivity: 1 mg/m (.0005 gr/SCF)


Applications:
• Continuous monitoring of emissions through an air filtration system
• Designed for general maintenance planning and process protection applications for baghouses, cartridge filters, bin vents and cyclones
• Used in metals, chemicals, fly ash, plastics, pharmaceuticals, food, utilities, mining, pulp, paper and many more applications

 

Unit of Measure

Specifications

Model

N/A Dust Detect 1000

Description

N/A Dust Detect power pac single piece, triboelectric broken bag detector, 115VAC

Voltage

N/A 115 VAC

Enclosure

N/A Die Cast Aluminum, FDA Aprroved power coat

Power Requirements

N/A 115 VAC, 230 VAC Optional 60/50 Hz

Operating Temp. Range

N/A -25 to 160 ºF-32 to 71 ºC

Stack Temperature

N/A 250 ºF107 ºC

Conduit Connection

N/A 3/4" NPT

Process Connection

N/A 1/4" NPT

Output

N/A Two SPDT 5A relays (warning and alarm) Optional 4-20 mA signal

Alarm

N/A Dual alarm (alarm is 2 x Pre-alarm) Switch selectable for instantaneous or one minute average

Sensitivity

N/A 1 mg/m (0.0005 gr/SCF)

Sensor Rod

N/A 316 Stainless Steel, 3, 6 and 12 " Standard, 1.5 - 30" custom length available

Manufacturer

N/A BinMaster