Search Catalog
      GO   
 All Categories    Aeration Lump Trap
All Categories > Dry Bulk Loading and Dust Control > Aeration > Item: Aeration Lump Trap  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item: Aeration Lump Trap






DCL's Aeration traps are ideal for handling material with lumps or other potential foreign materials. Such lumps are generally created in the silo by moisture and are typically unacceptable for loading in your customer’s vehicle. Aeration traps are also ideally suited to prevent foreign materials such as nuts, bolts, or gloves from processing downstream.


The lump trap eliminates large lumps by creating a gravity air trap inline with an aeration conveyor. This is done by passing low-pressure air through an overlapping configuration of porous membrane media and into the bed of the material being handled. Heavy lumps fall and are caught in the bottom of the lump trap which automatically empties using a level sensor and a series of slide gate valves.


You can handle a large variety of materials with aeration conveyors regardless of their abrasive nature or bulk density. The criteria are particle size, moisture content and temperature. Generally a product should have a particle distribution of 100% through a 20 mesh screen. Moisture content should be below 1% and temperature can not exceed 1200 degrees Fahrenheit [649° C].


DCL can perform a product compatibility test for you to determine the optimum conveying angles and aeration volumes for your application. We’ll need a minimum product amount of 2 cubic feet [0.07 m³] to conduct a proper test.


We offer a selection of aeration lump traps from 6 inches [152 mm] wide up to 36 inches [914 mm] wide and conveying capacities up to 1000 cubic feet per minute
[28.3 m³/min]. Lump traps also are available in a high-top or low-top design, offering you the choice of maximum flow rate or minimum head room that best suits your application.


A choice of construction materials allows you to effectively handle all types of products – fine, abrasive and corrosive – and difficult dusty or sanitary applications. You also have a choice of electrical operations that allow installation in almost any environment; NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.



 







Specifications

Manufacturer

Dust Control and Loading Systems, Inc.


 DOWNLOADS 

Aeration Conveying Brochure
(PDF, 925KB)



 Customers also viewed... 


Model FS Flow Switch
Model FS Bulk Material Flow Switch


VB Bin Aerators
VB Series Vibrating Bin Aerators

more available ..


 Customers also viewed... 


120 Digital Weight Indicator
120 Digital Weight Indicator


120 Plus Digital Weight Indicator
120 Plus Digital Weight Indicator

more available ..


 Customers also viewed... 


Magnetic Rail Flag Holder
Warning Flags & Flag Holders


Pulling & Positioning Railcars
Railcar Pulling Power Winches

more available ..