Search Catalog
      GO   
 All Categories    Horizontal Mount SmartBob
All Categories > Level Indication > Continuous Level Indicators > SmartBob > Item # SmartBob HM  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # SmartBob HM, Horizontal Mount SmartBob

List Price QUOTE


The SmartBob HM is an innovative version of BinMaster's proven SmartBob weight-and-cable based level sensor for mounting on the side of the bin, tank or silo. The SmartBob HM – for horizontal mount – can be used when it is not possible to install the sensor on the top of the bin. The SmartBob HM features a rigid extension that is custom-made from 12” to 36” long to install on the side of the bin through a 4” opening. Precise level measurements are taken at pre-determined time intervals at a location directly below the probe to continuously monitor the inventory of material inside of the bin.

The SmartBob HM continuous level sensor works like an automated tape measure, but eliminates the need to climb bins for manual measurements to reduce the risk of accidents in the workplace. Like all models of SmartBob sensors, it helps save time, money, and increase employee safety by sending level measurement data directly to a control console or eBob software installed on a PC. It is listed for Class II, Groups E, F, & G and enclosure types NEMA 4X, 5 and 12, ensuring the sensor is safe to use in locations where combustible dust may be present. It can be used in a mixed network of SmartBobs that are installed on the top of the bin or are monitoring other materials for a complete inventory management solution.


Features:
• Rigid extension in custom lengths from 12” to 36” long
• Innnovative design to install on the side of the bin
• Precise level measurements taken directly below the probe 
• Works like an automated tape measure, but eliminates the need to climb bins
• Sends level measurement data directly to a control console or eBob software installed on a PC
• Listed for Class II, Groups E, F, & G and enclosure types NEMA 4X, 5 and 12 
• Installs on the side of the bin through a 4” opening


Applications:   
• For mounting on the side of the bin, tank or silo
• Horizonal mounting for use when it is not possible to install the sensor on the top of the vessel
• Precise level measurmements taken at pre-determined time intervals
• For monitoring the level of powders and bulk solids
• Versatile for most every industry and solid or powder
• Can be used in hazardous locations where combustible dut may be present







Specifications

Power Requirements

115/230 VAC 50/60 Hz

Ambient Temperature

-40°F to +185°F (-40°C to +85°C)

Process Temperature

Up to 500°F (260°C)

Measurement Range

Up to 180’

Measurement Rate

2 feet per second

Accuracy

± 0.25% distance measurement accuracy

Mounting

Requires a 4" opening

Enclosure

Molded polycarbonate

Approvals

Listed for Class II, Groups E, F, & G Hazardous Locations

Enclosure Type

NEMA 4X, 5 and 12

Manufacturer

BinMaster


 DOWNLOADS 

BinMaster Full Line Brochure
(PDF, 2494KB)

SmartBob HM for Horizontal Mounting
(PDF, 1212KB)