Search Catalog
      GO   
 All Categories    41INL Steel Reducing Inverted Flare Nut
All Categories > Hose & Fittings > Fittings > Brass Inverted Flare Fittings > 41INL Steel Reducing Inverted Flare Nut > Item # 04330-06  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Item # 04330-06, 41INL Steel Reducing Inverted Flare Nut



Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or steel tubing
• –65° to +250° F. temperature range
• Seats and threads are recessed, protecting them
• Shorter overall length, for limited space applications
• Shorter nut allows tubing to be bent closer to fitting
• Fair vibration resistance
• Resists mechanical pullout
• Easy to disassemble, and can be reassembled many times, with no effect on the seal
• Primary uses: liquids, gases, and hydraulic brake systems

To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut on tube—threads facing end
3. Flare end of tube
4. Thread nut onto body until snug, then 1/6th turn






 Specifications   

Tube OD

3/8

Note

These products contain lead and are NOT ALLOWED by Federal Law to be installed for POTABLE WATER use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects or other reproductive harm.

Manufacturer

Anderson Metals Corporation