Search Catalog
      GO   
 All Categories    Flat Blade Diverter Valve
All Categories > Dry Bulk Loading and Dust Control > Dry Bulk Loading Valves > Diverter Valves > Flat Blade Diverter Valve > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Flat Blade Diverter Valve

Check up to five results to perform an action.



Flat blade diverter valves are designed to direct product flow from outlets of dry bulk storage bins, silos, conveyors, gravity flow chutes and other discharge points. DCL’s FBD housing is constructed of plate steel with cross member supports on larger sizes. The reinforced blade pivots on two flanged bearings, allowing it to open and close with ease.


Flat blade diverter valves can be actuated in many ways; pneumatically for fast action, hydraulically for power, electrically for convenience and manually with a chain wheel or lever. The seals on the flat blade diverter are designed to eliminate product leakage when the blade is in the diverted position. The seals are located at the top, sides and bottom of the blade. Blade seals are selected according to the material being handled and are available to suit any application.


DCL offers a large selection of flat blade diverter valves from 6 inches [152 mm] square up to 36 inches [914 mm] square. Flat blade diverter valves are also available in sizes larger than 36 inches [914 mm] and in special configurations including hardened liners.


The FBOD flat blade offset diverter valve is configured to direct the product flow straight through or to one side of the diverter. Typical product outlet offsets are 30 or 45 degrees off center. One blade and actuator is used on this diverter valve.


FBSD flat blade symmetric diverter valves have two product outlets, each 30 or 45 degrees off center. One blade and actuator is used on this diverter valve.


The FBTV flat blade triverter valve has one inlet and three outlets. The two side outlets are 30 or 45 degrees off the center outlet. Two blades and actuators are used on this valve.


A choice of construction materials allows you to effectively handle all types of products – fine, granular, lumpy, abrasive and corrosive – and difficult dusty or sanitary applications. You can also choose from the electrical options that are best suited for your environment: NEMA 4, NEMA 4X, NEMA 7, NEMA 9, 120V/220V control, 460V/415V power, etc.



 






 MORE IMAGES 

·  Flat Blade Diverter Valves Image (2)


 DOWNLOADS 

FBD Flat Blade Diverter Valve Brochure
(PDF, 928KB)

Aeration Conveying Brochure
(PDF, 925KB)

Compare Items
   
  Results 1 - 20 of 20 1 

Item #

Housing Material

Weight lbs.

FBOD30-06 Mild Steel (Abrasion resistant or stainless steel are optional) 132
FBOD30-08 Mild Steel (Abrasion resistant or stainless steel are optional) 160
FBOD30-10 Mild Steel (Abrasion resistant or stainless steel are optional) 246
FBOD30-12 Mild Steel (Abrasion resistant or stainless steel are optional) 270
FBOD30-14 Mild Steel (Abrasion resistant or stainless steel are optional) 434
FBOD30-16 Mild Steel (Abrasion resistant or stainless steel are optional) 530
FBOD30-18 Mild Steel (Abrasion resistant or stainless steel are optional) 662
FBOD30-24 Mild Steel (Abrasion resistant or stainless steel are optional) 1552
FBOD30-30 Mild Steel (Abrasion resistant or stainless steel are optional) N/A
FBOD30-36 Mild Steel (Abrasion resistant or stainless steel are optional) N/A
FBOD45-06 Mild Steel (Abrasion resistant or stainless steel are optional) 101
FBOD45-08 Mild Steel (Abrasion resistant or stainless steel are optional) 126
FBOD45-10 Mild Steel (Abrasion resistant or stainless steel are optional) 161
FBOD45-12 Mild Steel (Abrasion resistant or stainless steel are optional) 204
FBOD45-14 Mild Steel (Abrasion resistant or stainless steel are optional) 310
FBOD45-16 Mild Steel (Abrasion resistant or stainless steel are optional) 400
FBOD45-18 Mild Steel (Abrasion resistant or stainless steel are optional) 533
FBOD45-24 Mild Steel (Abrasion resistant or stainless steel are optional) 1135
FBOD45-30 Mild Steel (Abrasion resistant or stainless steel are optional) N/A
FBOD45-36 Mild Steel (Abrasion resistant or stainless steel are optional) N/A
  Results 1 - 20 of 20 1