The BM45 is a pressure switch that provides simple, low cost point level control with proven, lasting reliability. It is designed for use in bins containing non-hazardous, free-flowing dry materials such as grain, feed, seed or other granular or pelleted materials. The BM45 operates by sensing material pressing against the diaphragm switch. When the switch is pressed, it activates a sensitive micro-switch that can be wired to a visual (light) or audible (horn or bell) alarm to start or stop a process or alert to high, medium or low levels in bins. . Mounted on the top or side of a bin, the BinMaster BMRX alerts operators when bins are full without the rigors and risks associated with climbing and continuously checking bins levels. When material is not in contact with the paddle, the paddle rotates freely. When the paddle comes into contact with dry bulk material, the paddle stops rotating and sends a signal – normally through the use of a horn or light – to alert that the bin is full.


The BM45 series is offered in six different models. The variations include standard, heavy-duty neoprene or heavy-duty silicone diaphragm material and either internal or external mounting options. The basic, yet reliable operating mechanism is very rugged and requires minimal maintenance. It can be used in conjunction with BinMaster's point level alarm panel which is a console used to alert the user to bin level conditions for four to 24 level indicator stations. It helps saves time by allowing the user to monitor high, medium and low levels of multiple bins from a single console.

 

Features:
• Rugged construction and simple design
• Very economical point level detection
• Neoprene or silicone diaphragm material
• Internal or external mount
• Multiple voltages

 

Specifications:
• Switch Ratings: 15 Amps @125, 250 or 480 VAC, 1/8 HP @ 125 VAC, ¼ HP @ 250 VAC, 1/2 Amp @ 125 VDC, 1/4 Amp @ 250 VDC
• Operating Temp: -40°F to +300°F (-40°C to +149°C)
• Housing Enclosure: Die cast aluminum
• Mounting: Internal or external, 16 gauge galvanized mounting plate


Applications:
• Reliable point level detection for free flowing dry materials
• Used in bins, vessels and some plugged chute applications
• Material density from 20 lb./cu. ft.
• Feed, seed, grain, food, rubber, plastics, light powders, granules and many other materials

1 - 6 of 6 | Results Per Page | View | Unit of Measure
1 

Item #

Item Name

Mounting

Diaphragm Material

Temperature Range

Bulk Density

Sort by
N/A BM45-R N/A Internal N/A Neoprene, Black, .016” Thick N/A -30 to 220º F N/A 10 to 40 lb./cu. ft.
N/A BM45-F N/A External N/A Neoprene, Black, .016” Thick N/A -30 to 220º F N/A 10 to 40 lb./cu. ft.
N/A BM45-RHT N/A Internal N/A Silicone, Grey, .031” Thick N/A -40 to 350º F N/A 15 to 40 lb./cu. ft.
N/A BM45-FHT N/A External N/A Silicone, Grey, .031” Thick N/A -40 to 350º F N/A 15 to 40 lb./cu. ft.
N/A BM45-RH N/A Internal N/A Neoprene, Black, .031” Thick N/A -30 to 220º F N/A 15 to 60 lb./cu. ft.
N/A BM45-FH N/A External N/A Neoprene, Black, .031” Thick N/A -30 to 220º F N/A 15 to 60 lb./cu. ft.
1 - 6 of 6 | Results Per Page | View | Unit of Measure
1