Search Catalog
      GO   
 All Categories    Safe-T-Stop Remote System
All Categories > Radio Remote Controls > Hand Held Controllers > Safe-T-Stop Remote System > View Items  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Safe-T-Stop Remote System

Check up to five results to perform an action.

 

Help increase safety and reduce accidents with the Remtron brand SafeTStop(STS)TM . By giving the operators/supervisors the ability to be mobile, they are able to control and stop equipment from virtually any location safely. Along with 60 millisecond response time, the operator/supervisor can have direct control over equipment through rocker switches that provide 7 functions in addition to the ON/Alarm and STS switch. The Remtron brand STS systems are available with optional UL913 certifications and select systems are IP66/67 rated for the harshest conditions. Whether you are moving people or equipment, the Remtron brand STS gives you total control in any environment.

 


RF Characteristics:

  
 
RF unit………………………………Microprocessor controlled PLL synthesizer with up to 85 different channels
 
Frequency Range…………………902-928 Megahertz (MHz)
 
Channel Spacing…………………300 Kilohertz(KHz)
 
RF Power…………………………FCC Part 15: 50,000 microvolts per meter field strength
 
RF Approval………………………License-free in North America
 
FCC ID #EGT814TX
 
Industry Canada Certification #249 710 31887
 
Modulation…………………………Packet Mode, Digital Frequency, Modulation(FM) based on Manchester code
 
Response Time……………………60 Milliseconds
 
Update Rate…………………………16 packets per second command, 4 packets per second idle
 
Range………………………………300- ft. obstructed view, 1000-ft. line of sight (unobstructed)
 
Antenna………………………………Internal circuit board
 
 
  
 
Safety and Operational Characteristics:
 

Maintained Link……………………Receive at least one valid transmission each second to continue operations
 
Loss of Maintained Link……………Safety shutdown, positive restart required
 
Addressing…………………………16-bit, 65,535 unique addresses with 85 channels providing over 5 million variations
 
Safety Decoding……………………16-bit Cyclic Redundancy Codes (CRC) check
 
Safety Stop…………………………Over-riding Stop command with safety relay
 
Start-Up Safety……………………Start inhibited if controls pressed before start
 
Inadvertant Command Safety……Programmable time-out requiring positive restart (Push-to-Operate(PTO) commanding mode available)
 
Status Indications…………………LED indicators with status for power, active transmission and low-battery and failure (or control pressed on Start)
 
Battery Type………………………2 standard AA
 
Battery Operating Time……………130 hours of continuous operation
 
 
  
 
Environmental Characteristics :
 

Temperature Range………………-20° to +160° F (-29° to +71° C)
 
Humidity Range……………………0-97% maximum non-condensing
 
Environmental Protection…………Humisealed electronics
 
UL Rating……………………………Class I, Division I, and Group D (Class II ,Division I and Groups E, F, and G also available)
 
IP Rating……………………………IP 66/67 (Water/Dust resistant - 24T09A-1 version only
 
 


Physical Characteristics:
  
 
Style…………………………………Ergonomic handheld with Remtron patented rocker controls
 
Main Components…………………Surface mount technology, single board design
 
Housing Material…………………Remtron custom high impact fiber reinforced nylon
 
Weight……………………………10 oz. (0.283 kg)
 
Dimensions…………………………2.75” x 8.1” x 1.0”   (6.99 cm x 20.57 cm x 2.54 cm)






 DOWNLOADS 

Safe T Stop Brochure
(PDF, 1198KB)

Compare Items
   
  Results 1 - 2 of 2 1 

Item #

Frequency Range

Response Time

Operating Range (feet)

Battery Type

24T09A 902-928 MHz 60 Milliseconds 1000 line of sight; 300 obstructed view Two standard AA
24T09Z 902-928 Megahertz (MHz) 60 Milliseconds 300- ft. obstructed view, 1000-ft. line of sight (unobstructed) 2 standard AA
  Results 1 - 2 of 2 1