The SmartBob-TS1 sensor is an economical and compact inventory tracking system that has been designed to measure solids, powders, liquids or slurries in smaller bins, tanks and silos. The compact, yet rugged design can be mounted on angled or flat roofs and can be used in vessels up to 40 feet tall. Accessories include a variety of mounting flanges to accommodate from 0° and 40° roof angles, pipe extensions to provide cable protection, a selection of probes suitable for a variety of materials, and a gearbox motor heater for when operating temperatures fall below 32°.


SmartBob-TS1 is installed at the top of a vessel. When prompted to take a measurement, the rugged motor releases a nylon cable from the supply pulley and a weighted sensor probe descends to the surface of the material. When the sensor probe touches the material surface, measurement information is transmitted. This versatile measuring device can be used in conjunction with eBob inventory management software, the SmartBob control console, the BinMaster Remote Start Unit (RSU), and the MUCM communication module. It can be utilized in hardwired applications or with a wireless data transmitter.


Features:
• Economical, regardless of number of units installed
• 5th generation eBob PC-based inventory management software
• Output and display consoles for one up to 120 bins
• Requires no field calibration or adjustment
• Advanced microprocessor-based system with built-in measurement reliability
• Minimal ongoing operational and maintenance cost
• RS-485 network with wiring distance up to 4,000 ft.
• Simple daisy-chain wiring allows for easy installation
• Built-in wireless options available


Specifications:
• Power Requirements: 115/230 VAC 50/60 Hz
• Ambient Temp: -20°F to +140°F (-29°C to +60°C)
• Process Temp: Up to 140°F (60°C)
• Measurement Range: 60 feet
• Measurement Rate: 1 foot per second
• Accuracy: ± 0.25% distance measurement accuracy
• Mounting: Special bolt on or 3”- 6” NPT
• Enclosure: Rotational molded polyethylene
• Approvals & Certifications: NEMA 4X (IP65)

 

Applications:
• Rugged, simple, and dependable inventory measurement system for solid, liquid and slurry materials in vessels up to 60 feet
• Vendor-managed inventory
• Plastics, chemicals, coal, concrete, food ingredients, pharmaceuticals, feed, grain, aggregates and many other materials

 

1 - 2 of 2 | Results Per Page | View | Unit of Measure
1 

Item #

Model

Power Requirements

Power Consumption

Voltage

Current Draw

Process Temperatures

Accuracy

Measuring Range

Wiring Distance

Mounting

Sort by
N/A TS1-60-230 N/A 115 VAC 60Hz N/A 21 VA Continuous 37 VA intermittent N/A 230 VAC N/A 115VAC; 0.18 A Continuous 0.32 A intermittent N/A -20°F to +140°F (-28°C t0 60°C) N/A ±0.25% distance measurment accuracy N/A 60 feet maximum N/A 4,000 ft (1220 m) N/A Special bolt on and 3" NPT
N/A TS1-60-115 N/A 115 VAC 60Hz N/A 21 VA Continuous 37 VA intermittent N/A 115 VAC N/A 115VAC; 0.18 A Continuously 0.32 A intermittent N/A -20°F to +140°F (-28°C to 60°C) N/A ± 0.25% distance measurement accuracy N/A 60 feet maximum N/A 4,000 ft (1220 m) N/A Special bolt on and 3" NPT
1 - 2 of 2 | Results Per Page | View | Unit of Measure
1