Wintech’s four roller directional fairleads are
designed to direct cables at angles up to 45 degrees
from the load. Assembly configurations can be
customized to suit your application.
Standard Features:
• Heavy duty steel rollers
• Lubricated bronze bearings
• Alloy steel shafts with keeper tabs
• Weld down or bolt down base
• Heavy duty fabricated steel frame
Optional Available:
• Stainless steel shafts and hardware
• Self lubricated high capacity synthetic bearings
• Nylatron synthetic roller material
• Custom configuration and additional rollers
Wintech’s double sheave fairleads are designed for
mooring or load moving applications where the
cable exit angle changes with varied conditions.
Standard Features:
• Self-aligning design for cable exit at a wide
range of angles
• 360° head rotation
• Sealed tapered roller bearings in housing and
sheaves
• Heavy duty fabricated steel
construction
• Weld down or bolt down base
Options Available:
• Rear entry sheave for alignment of
cable to winch
• Nylatron synthetic cable sheaves
• Maximum angle STDP’s
• Customized sheave configurations
Wintech horizontal deflector sheave fairleads are
designed to assist in directing wire rope from the
winch to the load. Standard fairleads have heavy
duty construction and are designed for long life in
severe duty applications. Custom configurations
are available to suit unique rigging challenges.
Standard Features:
• Cast or steel sheave with precision machined
groove
• Deep groove sealed ball bearings
• Alloy steel shaft
• Heavy duty fabricated steel frame
• Bolt down or weld down base
Options Available:
• Greasable bronze bearings
• Stainless steel shaft and hardware
• Nylatron synthetic sheave
• Customized sheave configurations
Wintech vertical deflector sheave fairleads are
designed to assist in directing wire rope from the
winch to the load. Standard fairleads have heavy
duty construction and are designed for long life in
severe duty applications. Custom configurations
are available to suit unique rigging challenges.
Standard Features:
• Cast or steel sheave with precision machined
groove
• Deep groove sealed ball bearings
• Alloy steel shaft
• Heavy duty fabricated steel frame
• Bolt or weld down base
Options Available:
• Greasable bronze bearings
• Stainless steel shaft and hardware
• Nylatron synthetic sheave
• Customized sheave configurations
Wintech’s 90 Degree Quadrant Fairleads are designed to deflect cable requiring a large radius where space
may be limited. Mutliple sheaves form a large radius reducing cable fatigue.
Standard Features:
• 90° wrap angle
• Sealed bearing or bronze bearing sheaves
• Bolted frame construction
• Bolt down base angles
• Nylon or steel sheaves
• Customized to suit your cable specifications and load requirements
• Customized frames in steel, stainless, or aluminum
Wintech swivel directional flag blocks are designed
for floor or wall mounting. The fairlead pivots +/-
80 degrees from vertical, allowing varying wire rope
angles to the load. Blocks can be customized to suit
your application.
Standard Features:
• Cast or steel sheave with precision machined
groove
• Deep groove sealed ball bearings
• Alloy steel sheave shaft
• Fabricated steel upper frame with machined
pivot trunnion
• Bolt down base brackets with bronze bushings
• Bolt down or weld down base
Options Available:
• Greasable bronze sheave bearings
• Stainless steel shaft and hardware
• Nylatron synthetic sheave
• Cable entry fairlead rollers
• Customized configurations
Wintech self aligning roller chocks are designed to
accomodate various wire rope angles to the load.
They are ideal for face and wing rigging on barges
as the sheave pivots up and down to accomodate
both empty and loaded barges. The self fleeting
design results in reduced wear on both wire rope
and sheaves.
Standard Features:
• Nylatron synthetic sheave accomodates both
wire and synthetic ropes
• Stainless steel pins and hardware
• Self fleeting design
• Easy sheave replacement eliminating the need
for the vessel to be gas freed for w
Wintech Model RB-12-SYN 12” Synthetic Roller
Button is designed for use with synthetic ropes on
towing and various other marine applications.
Standard Features:
• 12” Replaceable Machined Nylon Sheave with Bronze
Bushing
• 12“ Replaceable Heavy Duty Machined Mounting Base
• Sintered Bronze Bushings and Thrust Washer
• Also available with Steel Sheave
• 1” Cable Capacity
Features:
• Compact, lightweight design
• Efficient weight to capacity ratio
• Rugged cast construction
• Tapered roller bearings
• Variety of top attachments
Note: The safe working load is based on a factor of safety of 4:1 of the ultimate capacity. If a higher factor is required the
safe working load must be lowered accordingly. Snatch block sheaves are filtered with tapered roller bearings.
