Flash Steam Recovery System
Kemco’s Flash Steam Recovery System is a conventional means for preheating and heating water. Each pound of condensate gives up approximately 144 BTU in the form of steam before it becomes water at 212ºF. This surplus of 144 BTU flashes to vapor and escapes from the vent of the condensate receiver. This represents a loss of approximately 12% of a plant’s fuel consumption. Kemco’s Flash Steam Recovery system can recover and use this energy.
Benefits:
• Eliminate Boiler “Flash Steam” Energy Loss
• Less Than 1 Year Payback
• Efficient Reliable Means To Heat Water
• Reduces Boiler Blowdown
• Little Maintenance Or Adjustments
Vaporcure Automatic Curing Control System
Vaporcure is designed to provide concrete curing operations with the ability to automatically control the concrete temperature by controlling the operation of the direct-fired steam generator. The main benefits of Vaporcure are precise control of the concrete temperature at all times and elimination of manual cure temperature operation.
Features:
• 40% - 60% Fuel Savings
• Meets Air Quality Emissions Guidelines
• 10 Seconds Instant Steam
• Steam Temperature/Moisture Control
• Protective Formed Steel Frame
• Noise Reduction Enclosure Available
• Digital Controller
• Digital Recorder
• Panelview PLC
• Electrically Actuated Control Valve
/Asset/Kemco steam generators image.jpg
Vapormite Automatic Curing Control System
(4)
The VAPORMITE™ SERIES is designed to provide the highest quality concrete steam curing equipment at an economical price. Built to the same high quality standards as our VAPORATOR™ SERIES is available in four sizes ranging from 0.5 to 2.0 million BTU/hr. All single speed for the greatest flexibility, ease of operation and minimum maintenance.
Features:
• 98% Fuel Efficient
• 40-60% Fuel Avoidance
• On-Demand Steam Production
• Low Pressure Operation
• PLC Controlled
• High Early Compression Strengths
/Asset/Vapormite 1.png
Vaporator Direct Fired Steam Generators
(5)
The Vaporator™ Series is the highest quality steam generator available for concrete curing. Designed to incorporate the latest proven advances in combustion, electronics and automation engineering, the Vaporator™ is the premium direct-fired steam generator available from VAPOR ENRGY™ USA. The VAPORATOR™ SERIES is available as multi-speed units in sizes ranging from 1.0 to 8.0 million BTU/Hr in order to meet the needs of even the largest and most complex concrete curing operations.
Additional Features:
• 98% Fuel Efficient
• 35-40% Fuel Avoidance
• On-Demand Steam Production
• Low Pressure Operation
• PLC Controlled
• High Early Compression Strengths
