The Martin® Idler Aligner provides a safe and effective method to manually fine tune self-adjusting idlers. The handle and comb allow for coarse adjustment, while slots allow for finer tuning.

Features and Benefits:
• Eliminates the need to tie off idlers to surrounding structure. Allows workers to safely and conveniently make manual adjustments to fine tune self-adjusting idlers from outside of the stringer.
• Features a hole for padlock placement to restrict access.
• Slotted comb provides a range of incremental adjustment settings (plus or minus 7.5 degrees) to ensure reliable, consistent performance. Alternatively, positioning the handle above the locking bar allows the handle to float freely to provide course adjustment of plus or minus 2.5 degrees.
• Installation is a one-man job, requiring no measuring, cutting or heavy lifting.

Options:
• Aligner bracket mounts to most manufacturers’ self-adjusting idlers.
• Stainless steel construction also available.

The Martin® Inspection Door is dust-tight and allows inspection and access in chutes and other enclosures for belt cleaner maintenance or other service requirements.

Features and Benefits:
• Latch handle folds down, so door stands only 2.25 inches (57 mm) high. (With handle standing, door is 4.1 inches (104 mm) high).
• Also available with integral guard screen.
• Suitable for service temperatures up to 400°F (204° C) continuous or 450° F (232° C) intermittent.
• Sturdy, dust-tight steel design.

Available in mild steel or stainless steel,
 
Martin® Inspection Doors HD provide quick and easy access to belt cleaners and other components inside chutes and enclosures for inspection or service.

Dust-Tight Seal

Rubber seal is protected by a steel channel and pre-vents material escape.

Built for Tough Conditions

Steel door withstands typical positive and negative pres-sure applications.

Simple Installation

Door can be bolted or welded to enclosure wall. Bolt hole pattern matches Martin® Inspection Doors.

Available with Wear Liner

Door can be ordered with AR400 or AR500 wear liner welded to the inside.

“Low-Profile” Design

Door height of 2.94 inches (75 mm) with handle in latched position.

Lockable Latch

All doors come standard with a lockable latch.

Matches Your Application

Six sizes available, from 9 X 12 to 24 X 24 inches (229 X 305 to 610 X 610 mm). Custom sizes are not available.