Beater Rolls 5" & 6" Diameter
(16)Features:
• Heavy 20mm (.787”) Precision, Permanent Sealed Bearings
• Only Effective Belt Cleaner for Side Wall and Cleated Belts
• For Best Results Install Immediately Behind Head Pulley
• Manufactured by: Douglas Manufacturing /Asset/beater rolls.png
CEMA B Rubber Cushion Flat Idlers - 4" & 5" Diameter
(12) /Asset/Superior Rubber Cushion Flat Idlers.jpg
CEMA B Rubber Cushion Return Idlers - 4" & 5" Diameter
(14) /Asset/Superior Rubber Cushion Return Idlers.jpg CEMA C Rubber Cushion Return Idlers - 4", 5" & 6" Diameter
(24) /Asset/Superior Rubber Cushion Return Idlers.jpg
CEMA C Self-Aligning Return Idlers - 4", 5" & 6" Diameter
(24)
Features:
• Misaligned belts contact side roller, idler pivots and centers belt.
• Concave shaped side guide rollers keep traction on belting.
• Compared to steel rollers, urethane side guide rollers are less abusive on belting.
• SpinGuard® Seal Technology for bullet-proof bearing protection.
Specifications:
• CEMA Rating: B, C, D, E and F
• Roll Diameter: 4" - 7"
• Troughing Angle: 20°, 35° and 45°
• Belt Width: 18" - 96"
Styles:
• Standard for positive action, one way belts
• Shoe activated for bi-directional belts.
Moxie™ Polyethylene Roll
Moxie™ rolls were developed to solve expensive problems caused by abrasive material and buildup.
Features & Benefits:
• Made with high density polyethylene material (HDPE)
• Half the weight of steel
• Improved material shedding ability
• Low roll resistance
• Less horsepower needs
• Retrofit to any major competition's frame or bracket...
The new Moxie roll is made from a high density polyethylene (HDPE) and features Superior's SpinGuard® seal technology. Because of this bearing configuration, and the lightweight HDPE, the Moxie roll has a very low roll resistance. This means it takes less horsepower to run, lowering your operating costs.
Moxie rolls also feature resistance to abrasion, corrosion, and sticky jams. Download the literature to learn more benefits about the new Moxie roll.
Urathon® Beater Roll
(52)
Cost-Effectively Shake Off Carryback Material
Features:
• Economical method of removing carryback material from bottom of belting.
• Maintenance free lobed discs cause light vibration to dislodge material from belting.
• Ideal installation is above stockpile, screen or bin so material hits discharge target.
• Purchase as individual urethane discs or complete idler with pre-assembled discs.
Specifications:
• CEMA Rating: C and D
• Roll Diameter: 4", 5" and 6"
• Belt Width: 18" - 60"
