SHT-120 High Temperature Vibrating Rod
The SHT or Super High Temperature vibrating rod series is built specifically for higher process temperatures up to 482°F (250°C). It features a standard insulation tube that insulates the electronics from excessive heat. It has a standard insertion length of 7.24 inches for both top and side mount applications. It can be extended from 13 inches up to 13 feet using a rigid pipe extension for top mount applications where extra length is desired.
It has three sensitivity settings, does not require calibration, and can be used to detect extremely light, fluffy materials. It features BinMaster’s unique stainless steel single "rod" probe design that prevents bridging and build-up of material on the sensor. Other benefits includes a switch-selectable, high/low fail-safe and an auto sensing power supply compatible with 20 up to 250 volts AC/DC. Remote electronics – using BinMaster’s point level alarm panel – allow for readings from four up to 24 sensors from a single device.
Features:
• Single stainless steel rod design
• No calibration required
• Wear and maintenance free
• No moving parts
• High and low level fail-safe
• Three sensitivity adjustments
• Universal power supply
• Self-cleaning sensor
• 1-1/2” NPT mounting
• Remote electronics available
• Insertion length from 7.37” to 13’
• Lagged design to locate electronics away from heat source
Specifications:
• Power Requirements: Wide range 20-250V AC/DC
• Power Consumption: 3 VA
• Relay: SPDT 5A 250 VAC (optional DPDT relay available)
• Time Delay: 1 second from stop of vibration, 2 to 5 seconds for start of vibration
• Ambient Temp: -4°F to +150°F (-40°C to +65°C)
• Process Temp: To 482°F (250°C)
• Pressure: 145 psi
• Wiring Cable: 1/2”
• Mounting: 1-1/2” NPT
• Enclosure: Die cast aluminum, NEMA 4, 5 & 12
• Probe: 304 stainless steel, (SHT-120 7.37” insertion length, SHT-140 14” to 13’ insertion length)
• Material Density: From 1.25 lb./cu. ft.
Applications:
• Suitable for high and low level indication, or plugged chute detection
• Built specifically for higher process temperatures up to 482°F (250°C)
• Detects extremely light, fluffy materials and materials with low dielectric constants
• Material densities from less than 1.25 lb./cu. ft.
• Carbon black, plastics, fly ash, feed, seed, grain, food, chemicals and many other materials
/Asset/Binmaster High Temp Vibrating Rod.jpg
SHT-140 High Temperature Vibrating Rod
The SHT or Super High Temperature vibrating rod series is built specifically for higher process temperatures up to 482°F (250°C). It features a standard insulation tube that insulates the electronics from excessive heat. It has a standard insertion length of 7.24 inches for both top and side mount applications. It can be extended from 13 inches up to 13 feet using a rigid pipe extension for top mount applications where extra length is desired.
It has three sensitivity settings, does not require calibration, and can be used to detect extremely light, fluffy materials. It features BinMaster’s unique stainless steel single "rod" probe design that prevents bridging and build-up of material on the sensor. Other benefits includes a switch-selectable, high/low fail-safe and an auto sensing power supply compatible with 20 up to 250 volts AC/DC. Remote electronics – using BinMaster’s point level alarm panel – allow for readings from four up to 24 sensors from a single device.
Features:
• Single stainless steel rod design
• No calibration required
• Wear and maintenance free
• No moving parts
• High and low level fail-safe
• Three sensitivity adjustments
• Universal power supply
• Self-cleaning sensor
• 1-1/2” NPT mounting
• Remote electronics available
• Insertion length from 7.37” to 13’
• Lagged design to locate electronics away from heat source
Specifications:
• Power Requirements: Wide range 20-250V AC/DC
• Power Consumption: 3 VA
• Relay: SPDT 5A 250 VAC (optional DPDT relay available)
• Time Delay: 1 second from stop of vibration, 2 to 5 seconds for start of vibration
• Ambient Temp: -4°F to +150°F (-40°C to +65°C)
• Process Temp: To 482°F (250°C)
• Pressure: 145 psi
• Wiring Cable: 1/2”
• Mounting: 1-1/2” NPT
• Enclosure: Die cast aluminum, NEMA 4, 5 & 12
• Probe: 304 stainless steel, (SHT-120 7.37” insertion length, SHT-140 14” to 13’ insertion length)
• Material Density: From 1.25 lb./cu. ft.
Applications:
Suitable for high and low level indication, or plugged chute detection
Built specifically for higher process temperatures up to 482°F (250°C)
Detects extremely light, fluffy materials and materials with low dielectric constants
Material densities from less than 1.25 lb./cu. ft.
Carbon black, plastics, fly ash, feed, seed, grain, food, chemicals and many other materials
