Features:
• Specify desired ID or OD of non Q-F end.
• Must be within maximum opened dimension, or will be priced as reducer.
• End style: q-f (standard), flanged, raw.
• Adapters can only be expanded up to .3” above standard ID.

3250 Angle Flange Adapter

Quick-Fit® Angle Flange Adapters manufactured by Nordfab® Ducting are fitted with an industry standard angle flange on one end and a WF rolled edge on the other to allow a quick connection of Quick Fit duct pipes and fittings to flanged pipes and fittings. Now available in galvanized, aluminum, stainless and stainless+ with optional no. 4 finish materials. Flanges are retained with a Van Stone lip.

Notes:

• QF® (standard), Flange, Raw
• Flat Flange: specify and provide hole pattern. If there is no hole pattern drawing included with order, flat flange will be blank

Construction:

• Seam: longitudinal seam is solid laser welded (exception: 3" adapter is lapped, spot welded, and caulked.)
• Ends: Angle flanged (AF) end can be modified to a 3/16" thick flat flange (FFL) to match your hole pattern

Features:
• A flared end adapter.
• Increases capture ratio of air, dust, smoke etc.
• 20 gauge

Hose adapters are available in Galvanized or Stainless Steel.