Products Catalog

Benefits:
• Maximum level of cleaning on return side of belt
• Prevents foreign material build up and decreases resultant belt and roller damage
• Diverts material when mounted on the top side of the belt, discharging material to one or both sides of conveyor belt
• Protects tail pulley and belt when used in front of tail pulley as a tramp material diverter and bottom belt cover cleaner

Construction:
• Standard carbon steel configuration
• Heavy duty construction with 1" thick urethane wiper blades for long life and efficient cleaning

Options:
• Stainless steel frame

Superior’s line of Exterra® Belt Cleaners has gained a reputation as one of the bulkiest conveyor belt scrapers in the marketplace. The patented blade design is manufactured with a thicker profile and beefier tip for more material at a scraper’s most crucial point of attack.


Features:
• Thicker blade tip means extra wear material at the blade's most critical point of contact.
• Shipped pre-assembled to limit confusion and time during installation.
• Replaceable blades secure to mounting pole without the use of tools.
• Upgrade to patented SFL tensioner for one time tensioning at installation of blade.


Specifications:
• Belt Widths: 18" - 72"
• Blade Widths: 10" - 70"
• Urethane Durometer: 87A

Features:
• Aggregate industry's thickest 7" blade profile.
• Thicker blade tips withstands more pressure at this crucial point of attack.
• Standard sizes stocked by distribution partners.

Superior's Exterra Replacement Blades can be used with the following belt cleaners:
• Martin® QC™ #1 Standard
• Martin® PV Belt Cleaner
• Martin® HD Belt Cleaner
• Flexco EZP1 Rockline®
• Argonics Eraser™
• Argonics Micro Eraser™
• Arch Saber Primary®
• Arch Mini Saber

Superior’s line of Exterra® Belt Cleaners has gained a reputation as one of the bulkiest conveyor belt scrapers in the marketplace. The patented blade design is manufactured with a thicker profile and beefier tip for more material at a scraper’s most crucial point of attack.

Here's the cleaner that's been engineered for the toughest conditions. Even under the most severe conditions this cleaner will give a year or more of the best possible belt cleaning with little or no maintenance.

Designed to clean and protect the INSIDE of your conveyor belt: The Model 74 is normally mounted in front of the tail pulley. Material, tools, and foreign objects are swept from belt by the "V" design, thus preventing belt or pulley damage, and possible belt misalignment.

The Model CW is a rugged and reliable conveyor belt cleaner that automatically places proper tension against the belt due to the counterweighted action. The counterweights are field adjustable. The CWD is similar to the Model CW but has 2 separate wiper blades working in tandem.

As with most conveyor belt applications, any carryback being deposited under the conveyor belt causes extra time, extra labor, and extra money in terms of clean-up and downtime. The Model CW and CWD provide a way to reduce the carryback and deposit where it belongs, in the discharge stream

Technical Specifications:
• The housing is polyester powder-coated mild or carbon steel.
• Standard 80 durometer rubber blade is 1" x 6" x belt width. Urethane blades available as an option.
• The unit is mounted on the conveyor using two hanger brackets, one per side.
• Unit is automatically under constant tension due to the counterweights.
• Mechanical belt splices pose no problem.
• The Model CWD has two independent rubber wiper blades for twice the cleaning power.
• The operating temperature range is -40ºF to 150ºF.

The Model CWD is a rugged and reliable conveyor belt cleaner that automatically places proper tension against the belt due to the counterweighted action. The counterweights are field adjustable. The CWD is similar to the Model CW but has 2 separate wiper blades working in tandem.

As with most conveyor belt applications, any carryback being deposited under the conveyor belt causes extra time, extra labor, and extra money in terms of clean-up and downtime. The Model CW and CWD provide a way to reduce the carryback and deposit where it belongs, in the discharge stream

Technical Specifications:
• The housing is polyester powder-coated mild or carbon steel.
• Standard 80 durometer rubber blade is 1" x 6" x belt width. Urethane blades available as an option.
• The unit is mounted on the conveyor using two hanger brackets, one per side.
• Unit is automatically under constant tension due to the counterweights.
• Mechanical belt splices pose no problem.
• The Model CWD has two independent rubber wiper blades for twice the cleaning power.
• The operating temperature range is -40ºF to 150ºF.

The Model FA is a multi-bladed spring arm cleaner that provides the ability for each blade to work independently of each other in order to remove carryback from a conveyor belt and deposit it into the discharge stream. The conveyor belt cleaner is available in a wide variety of blade materials.

The Model FA is an inexpensive way to reduce material from clinging to the conveyor belt and building up on idlers and pulleys. The independent blade arrangement does not damage mechanical belt splices.

Technical Specifications:
• Housing is polyester powder-coated carbon steel.
• Variety of blades to chose from, including rubber, urethane, stainless steel, nickel alloy coated, ceramic, and tungsten carbide.
• The unit is mounted on the conveyor by drilling (4) 9/16" diameter holes.
• Single pressure handle adjustment provides blade tension against the conveyor belt. Individual spring arms provide additional tension.
• Hanger rail mounting is standard, flange mounting or chute mounting also available.
• The operating temperature range is -40ºF to 150ºF

The Model HPT is used to prevent foreign material from being caught between the belt and the tail pulley. These conveyor belt cleaners deflect material off the belt before damage is done to the belting or tail pulley.

The Model HPT plow style belt cleaners reduces the chances of belt damage and punctures by removing foreign material from the inside of the conveyor belt. These cleaners are helpful where belts are being overloaded or skirting has been worn.

Technical Specifications:
• Housing is polyester powder-coated carbon steel.
• Standard 80 durometer rubber blade is 1" x 4" for Model PT, and 80 durometer rubber blade is 1" x 6" for Model HPT.
• The unit is mounted on the conveyor framework by welding or bolting.
• After initial installation, the spring loaded blade continues to adjust itself against the conveyor belt.
• Safety chains provided, securing plow to conveyor framework to avoid runaway situation.
• Urethane blades available as an option.
• The operating temperature range is -40ºF to 150ºF.

The Model LP is a low cost, highly efficient rubber bladed conveyor belt cleaner for use on medium speed belts. The belt cleaner mounts under the head pulley to remove carryback and return it into the discharge stream.

The Model LP provides an easy way to maintain conveyor belts, decreasing costly downtime and material clean-up.
 

Technical Specifications:
• The model LP belt cleaner is uncomplicated, durable, and effective.
• Housing is polyester powder-coated carbon steel.
• Standard 80 durometer rubber blade is 1" x 6" x belt width (inches).
• The unit is mounted on the conveyor by drilling (6) 9/16" diameter holes per side.
• After initial pretensioning, the spring loaded blade continues to adjust itself against the conveyor belt.
• Optional urethane wiper blade available, add "U" to model.
• Optional ratchet tensioner available, add "R" to model.
• Optional quick change vise grip available, add "V" to model.
• Optional compact side frames available, add "C" to model.
• Optional dual wipers blades available, add "D" to model.
• The operating temperature range is -40ºF to 150ºF.

The Model PT is used to prevent foreign material from being caught between the belt and the tail pulley. These conveyor belt cleaners deflect material off the belt before damage is done to the belting or tail pulley.

The Model PT plow style belt cleaners reduces the chances of belt damage and punctures by removing foreign material from the inside of the conveyor belt. These cleaners are helpful where belts are being overloaded or skirting has been worn.

Technical Specifications:
• Housing is polyester powder-coated carbon steel.
• Standard 80 durometer rubber blade is 1" x 4" for Model PT, and 80 durometer rubber blade is 1" x 6" for Model HPT.
• The unit is mounted on the conveyor framework by welding or bolting.
• After initial installation, the spring loaded blade continues to adjust itself against the conveyor belt.
• Safety chains provided, securing plow to conveyor framework to avoid runaway situation.
• Urethane blades available as an option.
• The operating temperature range is -40ºF to 150ºF.