• wintech_barge_40t-e.jpg

    Electric Low- Profile Barge Winch

    Standard Features:

    • Totally enclosed, marine grade, fully reversing crane and hoist duty
     motors in 220V, 440V, and 575V
    • Winch stall pulls from 11,000 to over 50,000 lbs
    • Winch electric brake and worm drive gear holds from 46,000 to
     111,000 lbs
    • Flame-cut precision machined side frames
    • Enclosed drive gearing
    • Steel gear guard prevents slack cable from fouling gears
    • Automatic disc brake
    • Simple effective design reduces maintenance costs

  • up.jpg

     STANDARD FEATURES:
    • Fully reversing crane and hoist duty motors that are totally enclosed.
    • Control from pilot house or deck.
    • Stall pulls to 40,000 lbs.
    • Improved brake holding capacity to 70,000 lbs.
    • Drum guard prevents slack cable from fouling gears.
    • Hand wheel for operation in the event of power loss.
    Standard Upright Electric 40 and 65 US Ton Barge Winch
    Taking The Winch Industry By Storm
    Low Downtime and Maintenance


    OPTIONAL FEATURES:
    • Flange-mounted ball bearings for power shaft, factory installed.
    • Grooved drums
    • Drum flange divider
    • Remote control packages:
     NEMA 1; General purpose enclosure
     NEMA 4; Watertight enclosure
     — NEMA 1 or 4 magnetic reversing starter
     — NEMA 1 or 4 push button station
    • Wintech Winch Cables

  • DC-30.jpg

    Standard Features:
    • 30 Ton Holding Capacity / 8000 lbs Line Pull at 18 fpm
    • 5 HP Severe Duty TEFC Electric with Holding Brake
    • Helical Worm Gear Reducer with Final Spur Gear Reduction
    • Drum accepts standard wedges for cable attachment
    • Guard covers all gears and chains
    • Manual drive option powered by 3/4” socket

  • DC-40.jpg

    Standard Features:
    • 40 Ton Holding Capacity / 10400 lbs Line Pull at 20 fpm
    • 7.5 HP Severe Duty TEFC Electric with Holding Brake
    • Helical Worm Gear Reducer with Final Spur Gear Reduction
    • Drum accepts standard wedges for cable attachment
    • Guard covers all gears and chains
    • Manual drive option powered by 3/4” socket

  • DC-65.jpg

    Standard Features:
    • 65 Ton Holding Capacity / 18000 lbs Line Pull at 16 fpm
    • 10 HP Severe Duty TEFC Electric with Holding Brake
    • Helical Worm Gear Reducer with Final Spur Gear Reduction
    • Drum accepts standard wedges for cable attachment
    • Guard covers all gears and chains
    • Manual drive option powered by 3/4” socket

  • 20HL-E1.jpg

    20HL - E1 Harbor Tug Winch 

    The 20HL-E1 Harbor Tug Winch was designed
    specifically for small pushboats and harbor tugs to
    save time in making up tows. The entire winch is
    designed with only 3 bushings, resulting in reduced
    maintenance and more up time.


    Standard Features:
    • 5 Horsepower TEFC Motor and Brake
    • 230/460 Volt - 3 Phase - 60 Hz Power
    • Spring set - Electric release holding brake
    • Fully enclosed gearbox with open final gear set
    • Machine cut gearing with protective guarding
    • Brake release and manual crank for emergency
     operation

  • 30HL-E1.jpg

    30HL - E1 Electric Deck Winch

    Standard Features:
    • 30 Ton Holding Capacity / 10,000 lb Line Pull on 1st
     Layer
    • 23 fpm Mid-Drum Line Speed
    • 5.4HP Severe Duty TEFC Electric Motor with
     Holding Brake
    • Helical Bevel Gear Reducer with Final Spur Gear
     Reduction
    • Removable Steel Hood Covers the entire drum
    • Manual hand crank for emergency operation

  • 40HL-E2-Deck.jpg

    40HL - E2 Electric Deck Winch

    Standard Features:
    • 40 Ton Holding Capacity / 13800 lbs Line Pull at 18 fpm
    • Pinch-Roller System Dramatically Reduces Cable Backlash
    • 7.5 HP Severe Duty TEFC Electric with Holding Brake
    • Helical Bevel Gear Reducer with Final Spur Gear Reduction
    • Drum accepts standard wedges for cable attachment
    • Removable Steel Hood Covers the entire drum
    • Nylatron Guide Rollers reduce cable wear