"Belle" Style Dust House
(2)
The dust house is equipped with either an air powered or electric powered vibrator used for the cleaning of the bags. If air powered, connect air supply line to the port located on center above the door, and supply the vibrator with 80 psi oiled or non-oiled air. If electric powered, reconnect power cord which exits the top side of dust house to the control box supplied. Operate vibration for approx. 5-10 minutes after each load of material has been blown in.
Specifications:
• Style PE 37
• Fiber 100% Polyester
• Weight 9 oz./Sq. Yd.
• Construction Spun/Spun
• Count 100W x 60F
• Air Permeability 20-30 C.F.M.
• Mullen Burst 500 PSI
• Tensile Strength Warp Direction 300#
• Fil Direction 275#
• Thermal Stability 2% Max. #00 Degrees F
• Max Operating Temp 275 Degrees F
• Efficiency 99.99%
|
Sq. Foot Bag Area |
Cap Cement |
|
150 |
375 C.F.M. |
|
225 |
675 C.F.M. |
C&W CP Series (Cartridge Pulse) Silo Dust Collectors
(9)C&W's CP-Series of Silo Dust Collectors offer you Pulse-Jet Technology combined with our cartridge filters to provide a highly effective, yet inexpensive solution for dust control. Our CP Silo Collectors are engineered by dust control specialists with careful attention to efficiency and user-friendliness. Also, available are weigh batcher collectors and round silo collectors.
Benefits:
• Compact
• Easy to Maintain
• Efficiency
• Long-Lasting, Durable
• Performance
• Reliable, Easy to Operate
Features:
• 12 Gauge, Heavy Duty Steel Construction
• 99.99% Filtration Efficiency
• Inlet Air Regulator and Moisture Separator
• Solid State Adjustable Timers w/ LED Display
• Test Ports for Monitoring Filter Media
• Tool-less Exchange of Filter Media
• Top Entry for Clean Side Filter Exchange
• Vertical, Wide-Pleat Cartridges
Options:
• Pressure Switch forAutomatic Cleaning
• Mini-helic Gauge
• Custom Designs and Sizes
• Special Mounting Flange forAdapting to Existing Flange
• Blower Packages, Standardor Custom-Built
• Special Filter Media
• Silo Anti-Overfill System
• Pressure Relief Valves andBin Indicators
HOPPERTOP
(2)
HOPPERTOP is a small cylindrical venting filter specifically for installation on weigh hoppers in concrete batching plants.
HOPPERTOP is a compact venting filter for mechanically filled hoppers. Dust which is separated from the air flow by a single WAM® cartridge filter element drops back into the hopper after an integrated automatic reverse air jet cleaning system inside the weather protection cover has removed the dust particles from the filter elements.
Performance & Technical Features - Benefits:
• Stainless steel flanged body
• Low emission level due to B.I.A.-certified filter media
• Special design compressed air jet cleaning system
• High filtration efficiency due to unique WAM® design filter elements
• Quick maintenance due to easy access for filtering element removal
• Filter surface: 1 m2
• Maintenance-free air jet cleaning unit integrated inside weather protection cover
• High cleaning efficiency due to "Full-Immersion" solenoid valves
• No tools required for filtering element removal
• Minimum maintenance required
• High efficiency
• Minimum space required
• Easy to fit and retrofit
C&W LPR Series (Low Profile Round) Silo Dust Collectors
(3)
C&W’s Low Profile Round (LPR) Silo Dust Collectors offer you Pulse-Jet technology and our cartridge filters to provide an efficient yet inexpensive solution for dust control. These collectors are compact and user-friendly with a low-profile and POP in-out filter media exchange, with no tools or need to remove blow pipes. They can also expand to higher capacities without having to replace the units.
Features:
• Lightweight
• Low 46" Working Height
• Pop In-out Filters
• Expandable
• Blow pipes built into interior Filters pop in-out with no tools needed
• Top Entry for clean side filter exchange
• Vertical, wide, pleated cartridges
• Expandable for higher capacity
• Solid state adjustable timers
• Pulse Air shut off safety switch
• Lifting lugs for crane mounting
• UV Rated Polyethylene Housing
Options:
• Automatic On/Off Flow Switch
• Minihelic Gauge
• Special Adaptable Mounting Flange
• Air Tank Auto-Drain
• Silo Anti-Overfill System
• Pressure Relief Valvesand Bin Indicators
SILOTOP Silo Venting Filter
(2)
SILOTOP® is a cylindrically shaped dust collector for venting of pneumatically filled silos. The stainless steel body contains vertically mounted, POLYPLEAT® filter elements. The air jet cleaning system is integrated in the hinged weather protection cover.
Dust separated from the air flow by special POLYPLEAT® filter elements drops back into the silo after an integrated automatic reverse air jet cleaning system inside the weather protection cover has removed it from the filter elements.
Performance and Technical Features:
• Compact 800mm (30 in) diameter 304 stainless steel body with bottom flange
• 24.5m2 (264 sq ft) filter surface
• Maintenance height = 1,145mm (3.75 ft)
• High filtration efficiency due to POLYPLEAT® filtering elements
• Low dust emission level due to B.I.A.-certified filter media
• Maintenance-free air jet cleaning unit integrated inside weather protection cover
• High cleaning efficiency due to "Full-Immersion" solenoid valves incorporated in corrosion-resistant aluminium air tank for minimum maintenance operation
• Safe 304 stainless steel weather protection cover with lockable snap hook
• No tools required for filtering element removal
• Weatherproof finish
• Robust design
• Perfectly accessible due to compact design
• Complete replacement of filter media by only one person within a few minutes
• Standard fitting of condensation release valve on air reservoir
•Reduced flow resistance and prevention of rust due to special 304 stainless steel air distributors
/Asset/WAM SILOTOP R03 image.jpg
SK Series (Shaker) Silo Dust Collectors
C&W’s Shaker Silo Collector was specifically designed for producers in sub-zero weather conditions because this unit is not susceptible to freezing as no compressed air is required. Our Shaker Silo Collectors are engineered by dust control specialists, with special attention to user-friendliness and efficiency. The mechanical shaker provides a thorough, yet gentle cleaning of the filter media to provide you with a highly effective, yet inexpensive solution to dust control. /Asset/shaker silo collector.JPG
WAMFLO® Flanged Round Dust Collectors
The WAMFLO® filter range is the latest result of WAM® research and development in dust filtration technology. Since it went into production in 2003, more than 6,000 units have left the factory. This dust collector model can be used for a variety of applications in virtually all industrial sectors.
Features:
• 304 stainless steel flanged cylindrical shape body
• Filter surface from 1 to 48m² (11 to 517 sq ft)
• Air volume from 60 to 4,500m³/h (35 to 2,650 cfm)
• Low emission level due to B.I.A.-certified filter media
• High filtration efficiency thanks to unique WAM® filtering elements
• Easy maintenance due to particularly quick access to the filtering element removal
• Multifunctional intelligent electronic control panel
• Filter elements: Round bags, elliptical bags, cartridges, POLYPLEAT®
• Comfortable maintenance height
• Compressed air jet cleaning system integrated in top cover
• High cleaning efficiency due to "Full Immersion" solenoid valves incorporated in aluminium air tank (corrosion-resistant) for low-on-maintenance operation
• Safe weather protection cover with lockable snap hook
• No tools for filtering element removal required
• Increased durability
• Reduced maintenance costs
• Hygienic operation
• Increased work safety
• Lower operating costs
• Exceptional price-quality ratio
WAMFLO® Dust Collectors are equipped with a cylindrical shape stainless steel body with flanged connection that contains vertically mounted POLYPLEAT® filter elements. The air jet cleaning system is integrated in the top cover.
WAMFLO® Dust Collectors are available with or without suction fan.
WAMFLO® Dust Collectors are used for both venting and suction applications. The modular system combines the maximum safety of a flanged body connection with the variety of options in terms of type of filter media and filtering elements with the unique integrated pneumatic cleaning system design.
/Asset/WAM WAMFLO Dust Collector Image.jpg
