Boot-Lift® Railcar Connector improves the speed and safety of connecting a hopper car to under-track systems, without workers crawling under the car, and without losing material to wind or contamination.


Features and Benefits:
• Boot prevents material loss, air pollution and contamination.
• Boots are automatically connected.
• Connector rises as railcar empties.
• Unit uses only 10 cfm at 90 psi (28 l/min. at 6.2 bar).
• Including double- or single-pocket, round-opening and GATX. Adapter plates allow interchangeability.


Options:
• Manual Aligner - simplifies car positioning by allowing adjustment of the Boot-Lift® Railcar Connector up to six inches (152 mm) total—three inches (76 mm) in either direction—along the track.
• Pneumatic Aligner - air-powered aligner provides eight inches (203 mm) of total adjustment—four inches (102 mm) in either direction—along the track. Remote control operation requires only 10 psi (0.7 bar) of air.

Items
Boot-Lift Railcar Connector

Boot-Lift® Railcar Connector

Boot-Lift Railcar Connector

Boot-Lift® Railcar Connector

Boot-Lift Railcar Connector

Boot-Lift® Railcar Connector

Boot-Lift Railcar Connector

Boot-Lift® Railcar Connector

Boot-Lift Railcar Connector

Boot-Lift® Railcar Connector
(A) Inch N/A 57
(B) Inch - Extended N/A 18.5 N/A 18.5 N/A 22.23 N/A 21.56 N/A 21.93
(B) Inch - Retracted N/A 4.50 N/A 4.50 N/A 6.03 N/A 5.34 N/A 5.71
(C) Inch N/A 42.26 N/A 50.26 N/A 36.26 N/A 36.26 N/A 36.26
(D) Inch N/A 54 N/A 54 N/A 48 N/A 54† N/A 54††
(E) Inch N/A 29.1 N/A 37.1 N/A 23 N/A 23.1 N/A 23.1
(F) Inch - Funnel Opening N/A 22 N/A 30 N/A Ø 15 N/A 12.5 N/A 12.5
Manufacturer N/A Martin Engineering