Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or steel tubing
• –65° to +250° F. temperature range
• Seats and threads are recessed, protecting them
• Shorter overall length, for limited space applications
• Shorter nut allows tubing to be bent closer to fitting
• Fair vibration resistance
• Resists mechanical pullout
• Easy to disassemble, and can be reassembled many times, with no effect on the seal
• Primary uses: liquids, gases, and hydraulic brake systems

To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut on tube—threads facing end
3. Flare end of tube
4. Thread nut onto body until snug, then 1/6th turn

Request Information
Items
664IN Cylinder Adapter

664IN Dual Master Cylinder Adapter
664IN Cylinder Adapter

664IN Dual Master Cylinder Adapter
664IN Cylinder Adapter

664IN Dual Master Cylinder Adapter
664IN Cylinder Adapter

664IN Dual Master Cylinder Adapter
664IN Cylinder Adapter

664IN Dual Master Cylinder Adapter
Tube OD N/A 3/16(3/8-24) x 3/16 (9/16-18) N/A 3/16(3/8-24) x 3/16(9/16-20) N/A 1/4(7/16-24) x 1/4(9/16-18) N/A 3/16(1/2-20) x 3/16(9/16-18) N/A 3/16(9/16-18) x 3/16(1/2-20)
Note N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer N/A Anderson Metals Corporation