Print Back


The K Series Pneumatic Ball Vibrators are composed of a rustproof extruded aluminum body fitted with hardened steel races on which a steel ball rotates.  Nylon end plates are located on either side to contain the ball and prevent the entry of dust and water, thus allowing the unit to be used in dusty or wet environments. Inlet and exhaust ports have standard pipe threads, allowing the exhaust air to be piped away if necessary. The K Series Models can be installed in areas with temperatures up to 212°F. Two pairs of mounting holes are provided for either vertical or horizontal mounting.  K Series ball vibrators are small in overall size. Frequency and force can easily be regulated by adjusting the supply air pressure between 20 and 80 p.s.i. This ease of adjustment makes them extremely versatile when used for:

• Aiding material flow from bins and hoppers
• Preventing bottles and other small objects from clogging conveyor systems
• Compacting material in containers or molds
• Particle sizing on vibrating screens


Inlet Fitting and Exhaust Muffler are included with each K Series Vibrator.

Unit of Measure

Specifications

Frequency at 30 psi

N/A 16000 vpm

Frequency at 60 psi

N/A 20800 vpm

Frequency at 90 psi

N/A 23600 vpm

Centrifugal Force at 30 psi

N/A 88 lbs

Centrifugal Force at 60 psi

N/A 146 lbs

Centrifugal Force at 90 psi

N/A 191 lbs

Air Consumption at 30 psi

N/A 3.3 cfm

Air Consumption at 60 psi

N/A 5.6 cfm

Air Consumption at 90 psi

N/A 7.9 cfm

(B) Inch

N/A 0.94

(C) Inch

N/A 4.45

(D) Inch

N/A 3.54

(E) Inch

N/A 0.63

(F) Inch

N/A 0.35

(G) Inch

N/A 1.97

Thread BSP (H)

N/A 1/4"

Weight lbs.

N/A 0.57

Manufacturer

N/A Houston Vibrator (HVI)