Print Back

SmartWave is a very accurate, low-noise pulse radar transmitter for distances up to 100 feet. It is designed to allow for the tracking of any material from the tip of the rod antenna to the bottom of the tank, regardless of the tank shape or environmental conditions. It is highly sensitive and reliable over time; any build up on the rod antenna does not deteriorate the performance of the radar probe. Its unique radar design eliminates problems when a target is close to the antenna, while also providing for optimal performance and accurate measurements.

It offers simple two-point, push-button calibration making it appropriate for a range of materials, having been proven in a variety of powder and bulk solid application and can also be used for other critical non-contact applications for food, beverages or chemicals. The SmartWave transmitter also features a low dialectic mode setting, which allows it to work with dielectrics around two and higher. SmartWave can accommodate output of a 4 to 20 mA signal and offers optional RS-232 or RS-485 connections, allowing it to be networked to other devices.


Features:
• Low noise
• Accurate and reliable
• High sensitivity
• Self-adjusting amplitude and width of microwave pulse
• Easy two-point, push-button calibration
• 4-20 mA signal output
• RS-485 communications with PC-based utility/diagnostic program
• Uniform polar pattern
• No mounting influence


Specifications:
• Power Requirements: AC units 115 VAC 60 Hz or 230 VAC 50 Hz; DC units 12 to 30 VDC 0.07 Amp
• Ambient Temp: -40°F to +140°F (-40°C to +60°C)
• Process Temp: PP rod to 140°F (60°C); PTFE rod to 400°F (204°C)
• Operation: Pulse radar
• Frequency: 6.3 GHz
• Measurement Range Liquids: 100’ maximum
• Measurement Range Solids: 50’ maximum
• Accuracy: ± 0.25%
• Transmitter Power: 50 uW average
• Antenna: Dielectric rod (Polypropylene & optional Teflon)
• Output: 4-20 mA and RS-485
• Mounting: 2” NPT
• Enclosure: Aluminum-94VO (optional stainless steel)
• Approvals & Certifications: NEMA 4X (IP65), explosion proof units available


Applications:
• Continuous, non-contact level monitoring of tanks, bins, and silos
• Self-adjusting
• Measuring range up to 100 feet using 6.3 GHz operating frequency
• Adapts to adverse conditions
• Food, beverages, water or wastewater, chemicals (with vapor), plastics, sand, grain, aggregates, hot asphalt and many more applications

Unit of Measure

Specifications

Model

N/A SS400-100RC

Voltage

N/A 115 VAC
Range1 N/A 100 ft30 M

Resolution

N/A 0.44 in1.1 mm

Mounting

N/A 2.0" NPT

Manufacturer

N/A BinMaster
  • 1 Minimum distance starts at the lower tip of the antenna