Print Back


Features:

• Square-wave pulse frequency output,NPN open-collector
• Zero speed operation with no signal loss
• 5-24 VDC powered
• Non-contact, large gap distance sensing
• Simple to install and set up
• Bidirectional (quadrature) options
• Works with Electro-Sensors magnetic pulser discs / wraps
• Optional Mounting Bracket Assembly and Mounting Magnet


Model 906 sensors are water resistant and suitable for industrial applications, including environments where dirt, dust, grease, or moisture are present. The 906 standard sensor has a threaded aluminum body, and is supplied with a mounting bracket and 10 ft of cable. The quadrature (bidirectional) option has two sensors and is designed for applications requiring both speed and direction information.


These speed sensors use magnet-sensing Hall Effect IC's to produce a digital pulse signal to interface with speed switches, tachometers, counters, signal conditioners, or PLC's. Hall Effect sensors provide true zero speed operation with square-wave output and immunity to electrical noise.


A pulser disc or split collar pulser wrap with embedded magnets is mounted on the monitored shaft. As the shaft rotates, the magnets pass in front of the sensor causing the sensor to switch high and low, thus producing a digital pulse output. The sensors provide a digital square wave signal with a 50/50 duty cycle when used with pulse generators that have evenly spaced magnets of alternating polarity, such as Electro-Sensors Model 255 Pulser Disc. The recommended gap distance between the sensor and pulse generator is 1/4 inch +/- 1/8 inch. The gap flexibility makes the sensors tolerant of vibration, shaft run-out, misalignment, and industrial environments.

 

906 Hall Effect Image
Unit of Measure
1 

Item #

Model

Description

System Used With

Certifications

775-000500 N/A 906 N/A Hall Effect, threaded aluminum N/A 3-wire sensor units N/A ISO 9001
775-000400 N/A 906-SS N/A Hall Effect, threaded stainless steel N/A 3-wire sensor units N/A ISO 9001
775-000502 N/A 906-HT N/A Hall Effect, threaded aluminum, high temp Teflon cable N/A 3-wire sensor units N/A ISO 9001
775-000600 N/A 907 N/A Hall Effect, explosionproof (XP) N/A 3-wire sensor units N/A ISO 9001
775-110101 N/A 1101 N/A Hall Effect, stainless steel N/A 3-wire sensor units N/A ISO 9001
775-001400 N/A HE950 N/A Biased Hall Effect N/A 3-wire sensor units N/A ISO 9001
775-093200 N/A 932 N/A Magnetoresistive, threaded aluminum N/A 3-wire sensor units N/A ISO 9001
775-110201 N/A 1102 N/A Magnetoresistive, stainless steel N/A 3-wire sensor units N/A ISO 9001
775-093300 N/A 933 N/A Magnetoresistive, explosionproof N/A 3-wire sensor units N/A ISO 9001
775-000504 N/A 906-B N/A Hall Effect, threaded aluminum bi-directional N/A 4-wire sensor units N/A ISO 9001
775-000404 N/A 906-B-SS N/A Hall Effect, threaded stainless steel bi-directional N/A 4-wire sensor units N/A ISO 9001
775-006100 N/A 907-BV N/A Hall Effect (XP) bi-directional vertical mount N/A 4-wire sensor units N/A ISO 9001
775-006101 N/A 907-BH N/A Hall Effect (XP) bi-directional horizontal mount N/A 4-wire sensor units N/A ISO 9001
Unit of Measure
1