Print Back


RVS Blow-Through Rotary Valves consist of a tubular cast iron or stainless steel casing, a horizontally mounted rotor with a certain number of oblique V-shaped cross section compartments, a drive unit and a casing cover at each end.


Two compartments at a time of the continuously turning rotor are filled up with material through the inlet at the top of the Rotary Valve. After less than half a turn the material falls through the bottom opening into an air stream passing through a pneumatic conveying pipeline connected with the bottom part of the Rotary Valve.


Performance and Technical Features:
• Available in ATEX zone 22 version
• Robust and compact design
• Rotor: integral with beveled blades, with scrapers (Viton®, Vulkolan, Teflon®)
• Fixed rotor speed: 10 / 20 / 30 r.p.m.
• Variable rotor speed: 4 ¿ 22 r.p.m.
• Rotor surface treatment: nickel plating, Teflon® coating, hardened blades
• Casing: cast iron or 304 / 316 stainles steel
• Casing surface treatment: nickel plating, Teflon® coating
• Drives: direct with gear motor, with variable speed gear motor, coaxial with chain transmission, bare shafted without drive
• Easy access to all internal mechanical parts

RVS/C valves image
RVS/C rotary valve with variable speed drawing
1 

Item #

Q 1 (mm)

Q 2 (mm)

Q 3 (mm)

R 1 (mm)

R 2 (mm)

R 3 (mm)

H (mm)

kW

E-Motor RPM

Variator RPM

Rotor RPM

RVS/C 05 N/A 505 N/A 342 N/A 163 N/A 550 N/A 130 N/A 420 N/A 335 N/A 0.37 N/A 1400 N/A 190-1000 N/A 4-20
RVS/C 10 N/A 572 N/A 372 N/A 200 N/A 560 N/A 140 N/A 420 N/A 339 N/A 0.73 N/A 1400 N/A 190-1000 N/A 4-20
RVS/C 15 N/A 605 N/A 390 N/A 215 N/A 588 N/A 162 N/A 426 N/A 399 N/A 0.75 N/A 1400 N/A 190-1000 N/A 4-20
RVS/C 20 N/A 705 N/A 444 N/A 261 N/A 608 N/A 181 N/A 426 N/A 447 N/A 0.75 N/A 1400 N/A 190-1000 N/A 4-20
RVS/C 35 N/A 890 N/A 558 N/A 332 N/A 740 N/A 217 N/A 523 N/A 530 N/A 1.5 N/A 1400 N/A 190-1000 N/A 4-20
RVS/C 80 N/A 1198 N/A 747 N/A 451 N/A 1165 N/A 277 N/A 888 N/A 677 N/A 2.2 N/A 1400 N/A 190-1000 N/A 4-20
1