Print Back


HazardPRO belt alignment temperature sensors connect directly to the HazardPRO transmitter node as an integral part of the hazard monitoring system. The user installs the sensor and connects it to the node, no user calibration is required.

Features:
• Direct connection to HazardPRO node
• Fixed cable with M12 connector included
• 2-wire (current loop type)
• Installs in-line of belt travel
• Optional stainless steel jacketed cable
• Class II, Div 1, Groups E, F, G, Class III, Div 1

The belt alignment temperature sensor is mounted on the machine in a location such that if the belt moves to the inside of the casing, the brass sensor body will be contacted and the resulting temperature rise will be detected.

HazardPRO Belt Alignment Temperature Sensor
1 

Item #

Description

775-007050 N/A 2 inch Diameter Round Rub Block, 2 Meters Polyurethane Cable
775-007051 N/A 2 inch Diameter Round Rub Block, 5 Meters Polyurethane Cable
775-007052 N/A 2 inch Diameter Round Rub Block, 2 Meters Stainless Steel Cable
775-007053 N/A 2 inch Diameter Round Rub Block, 5 Meters Stainless Steel Cable
1