The Compact Pro is a compact capacitance probe for reliable level measurement and plugged chute detection for liquid, powder, granular, and pelleted materials. This probe is designed for tight spaces where proximity switches will not work and is appropriate for use in tanks, bins, silos, chutes, conveyors, pipes and load out hoppers. Operation is independent of bin wall and it can be used with either metal or non-metallic vessels. It features four levels of static discharge protection, which ismore
The Compact Pro is a compact capacitance probe for reliable level measurement and plugged chute detection for liquid, powder, granular, and pelleted materials. This probe is designed for tight spaces where proximity switches will not work and is appropriate for use in tanks, bins, silos, chutes, conveyors, pipes and load out hoppers. Operation is independent of bin wall and it can be used with either metal or non-metallic vessels. It features four levels of static discharge protection, which is important for pneumatically conveyed materials.
Compact Pro is simple to set up and requires virtually no maintenance. Its compact design makes it easy to install and a simple "one-time" calibration procedure with sensitivity up to less than one picofarad ensures fast set up. It requires no routine preventive maintenance and its operation unaffected by temperature changes, eliminating the need for recalibration. In addition, its special Pro Shield technology ignores material buildup that can cause proximity switches to fail. A visual LED on the housing indicates sensor status at-a-glance, showing the presence or absence of material.
Features:
• PRO-Shield feature ignores material buildup
• LED on housing indicates sensor status: covered or uncovered
• Easy “one-time” calibration
• Compact design; simple to install
• For metal, plastic or other non-metallic vessels
Specifications:
• Power Requirements: 115, 230 VAC or 24 VDC
• Output Relay: SPDT 5 amp at 250 VAC
• Ambient Temp: -40°F to +185°F (-40°C to +85°C)
• Process Temp: To 240°F (116°C)
• Pressure: 150 PSI
• Approvals & Certifications: NEMA 4X, 5 & 12
• Enclosure: PVC
• Probe: CPVC
• Mounting: 1” NPS (1-1/4” adapter available)
• LED: Indicates material presence or absence
Applications:
• Point level detection and process control in liquid, powder, granular and pelleted materials
• Used in smaller bins, vessels, tanks and chutes
• Plastics, chemicals, concrete, food ingredients, pharmaceuticals, feed, grain, wood or paper processing, many other materials
• Works where proximity switches don’t
less
Specifications
Model |
N/A Compact Pro 230 |
Voltage |
N/A 230 VAC |
Power Requirements |
N/A 120 VAC, 1.5 VA |
Output Relay |
N/A SPDT 5 amp at 250 VAC |
Electronic Temperature Range |
N/A -40 to 85 ºC-40 to 185 ºF |
Probe Temperature Range |
N/A -40 to 116 ºC-40 to 240 ºF |
Sensitivity Setting |
N/A Adjustable sensitivity to <1 Picofarad |
Calibration |
N/A Multi-turn Potentiometer |
Fail-Safe Mode |
N/A Switch selectable, High/Low |
Time Delay |
N/A Ajustable 1 to 30 seconds |
Enclosure |
N/A PVC |
Probe |
N/A CPVC |
Mounting |
N/A 1" NPS (1 1/4" NPT Adapter available) |
LED Indicator |
N/A Material Absence Material Presence |
Manufacturer |
N/A BinMaster |
