Features:
• One piece construction, available in barstock or forgings
• Used with brass or steel pipe
• All pipe threads are “American Standard Taper Pipe Threads”
• Fair vibration resistance
• Used in low to medium pressure applications
• Teflon tape or pipe sealant is recommended
• Pipe threads should be tightened 2 1/2 turns past finger tight
• One piece construction, available in barstock or forgings
• Used with brass or steel pipe
• All pipe threads are “American Standard Taper Pipe Threads”
• Fair vibration resistance
• Used in low to medium pressure applications
• Teflon tape or pipe sealant is recommended
• Pipe threads should be tightened 2 1/2 turns past finger tight
Nominal Size |
N/A 1/4S |
Manufacturer |
N/A Anderson Metals Corporation |
Note |
N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects |
