The COALESCER will remove oil as small as 0.01 micron and larger with 99.9998% efficiency. For applications where water and oil aerosols are a contaminate, use the ELIMINIZER COMBO. Install units in a vertical position with the drains pointing downward and the air flowing in the direction indicated by the arrow on the castings. Install unit as far from the compressor as possible and as close as possible to the place where the air is to be used. Always install the unit before the regulator. Do not attempt to service the unit with the air pressure in the bowls, always bleed the air from the unit prior to disassembly. Replace element at ±6 month intervals. Service the drain on a regular 3 month interval to ensure proper function and performance of the unit.
Features:
• Removes dirt and oil up to 0.01 micron
• Available in 1/4" NPT - 6" ASA (150#) flange sizes
• Available in 60-3000 scfm @ 100 PSI
Specifications
NPT |
N/A 1/2 |
Air Flow |
N/A 60 scfm |
Filtration Level |
N/A 0.01 micron |
ISO 8573 Performance Level |
N/A Class 1 Particulate and Oil |
Contamination Removed |
N/A Particulate and Oil |
Bowl Type |
N/A FDA Powder-Coated Aluminum |
Drain Type |
N/A Manual |
Max. Temp |
N/A 150 ºF |
Max. Pressure |
N/A 200 psig |
Manufacturer |
N/A Reading Technologies, Inc. (RTI) |
