JEC Products & Systems............................................ Bulk Tanker Blowers Butterfly Valves & ActuatorsConcrete Batch PlantsConcrete Plant AutomationContinuous MixersConveyor AccessoriesConveyor ProductsDust Control SystemsHopper Car Unloading SystemsHose and FittingsLevel IndicationMetal Fiber DispensersMotion ControlsOverhead DistributionSystemsPiggyback Hopper FramePillow BlockPlanetary MixersPost Drivers & Post PullersRadio Remote ControlScales and Load CellsSilo & Silo AccessoriesSilo Aeration ProductsSilo Anti-Overfill SystemsSolenoid Valves, Air Cylinders & Airline Accessories Ticket Delivery SystemTurbine MixersTwin Shaft MixersVibrating ScreensVibratorsWater Meters, Water Heaters/Chillers & Steam Generators JEC Services............................................Plant & System AssemblyField Services Engineered Retrofits
The C-50 Analog Expansion Console interfaces with the C-100 SmartBob Control Console to provide multiple 4-20mA outputs, enabling monitoring of multiple bins equipped with SmartBob2 or SmartBob TS-1 sensors from a single C-100 SmartBob Console. The C-50 Analog Expansion Console connects to the C-100 SmartBob Console via a dedicated RS-485 cable. Then, the C-100 SmartBob Console is connected via a daisy chained RS-485 network to monitor from 1 to 120 SmartBob sensors.
Both SmartBob2 or SmartBob-TS1 sensors and the C-50 Analog Expansion Console are programmed and controlled by the C-100 SmartBob Control Console. Wiring and installation costs are considerably reduced by utilizing a single cable RS-485 network and locating the C-50 Analog Expansion Console close to the location the 4-20 mA outputs are hardwired.
Features:• Interfaces with the C-100 SmartBob Control Console to provide multiple 4 - 20 mA outputs• Enables monitoring of multiple bins equipped with SmartBob2 or SmartBob-TS1 sensors from a single C-100 SmartBob Console• Reduces wiring and installation costs considerably requiring less equipment to monitor multiple bins• Up to five C-50 Expansion Consoles can be daisy-chained in a single network, allowing for monitoring a total of up to 120 SmartBob devices
Specifications:• Power Requirements: 8 W minimum for 3 or less I/O cards, 16 W minimum for 4 or more I/O cards• Connection: RS-485• Industrial Output Continuous: 4 - 20 mA• Maintenance Port: RS-232• Operating Temperature: -4°F to 140°F (-20°C to 60°C)• Enclosure: Polycarbonate, NEMA Type I, IP40• Dimensions: 6.5” x 6.3” x 3.5” (166mm x 160mm x 89mm)• Mounting: Wall mount using screw holes
Applications:• Operations using SmartBob sensors and a C-100 console that need additional 4-20 mA outputs for networked communications
