The Powtek U-2 Fluidization Nozzle is used to aid the flow of product out of bins and silos.

It is fast and easy to install - just drill a hole, weld the bushing and insert the nozzle.

With the Powtek Nozzle installation and maintenance are done from the outside. The operator does not need to go inside the silo.

How it works:

By adding air to the powder inside the silo’s cone the friction between the wall and the product is reduced enhancing a more balanced material discharge.

Since the entire body is made of carbon steel, it can be extracted and applied again as many times as necessary as opposed to other models on the market made of plastic that can only be cleaned once or twice.

The number of nozzles to be used depends on the size of the cone.
Nozzles are usually applied in rows of 3.

The operation cycle can be:
1 -continuous with a constant flow of air at 5 psi
2 -intermittent using higher 10-20 psi air pressure.
In this second case a timer and a solenoid valve are required


Air Pressure

N/A 2 to 5 PSI

Air Consumption

N/A 0.1 cfm at 5 PSI


N/A 10 ounces

Housing Material

N/A Nickel Coated Carbon Steel


N/A Carbon Steel

Exhaust Port Material

N/A Bronze Alloy

Inlet Port Size

N/A 1/2" BSP


N/A Powtek