Products Catalog

Control Chief has established a new standard in the wireless industrial control market. This radio is an outstanding value, featuring a compact, 12-button transmitter and a full complement of safety features. The pre-wired receiver makes installation and set-up simple.

Features:
• Puts operator in total control of equipment from plant floor
• Long range operation of up to 1000 ft. (8 power settings available)
• Prewired receiver for quick installation
• Two (2) speed (SK2500) 5-motion models
• Red Mushroom pushbutton (mainline contactor control)
• IP65 rated glass reinforced nylon enclosures
• TX power consumption = 28mA
• Power Indicator on RX for troubleshooting ease
• Start up/Shut down (No external alarm needed)
• 25KHz channel spacing
• Operation frequency: 430 ~ 435 MHz fully compliant with FCC Part 15 un-licensed and CE European directive (non-licensed system)

General Specifications:
• 70 Operating channels
• Over one million sets of ID codes
• Channel space = 25 KHz
• Hamming distance ≥ 4
• Operating temperature: -40° C ~ +85° C
• Enhanced glass-fiber structure
• Operating distance up to 300 meters

Transmitter Specifications:
• Runs on four (4) standard AA alkaline batteries
• Weight = 385 g
• Dimensions – 3.17” x 2.37” x 10.91” (LxWxH)*
• RF output power < 10mW
• Removable magnetic key (water resistant)
• Shock resistant design impact durability to 50G
• Wide selection of pushbutton symbols

Receiver Specifications:
• Available in AC or DC power
• Weight = 2.9 kg
• Shock resistant mounting provision, impact durability up to 20G
• External F-style connector for optional Dipole antenna
• Dimensions ~ 6.67” x 4.4” x 10.8” (LxWxH)

This robust transmitter design incorporates 24-bit security encryption and 900MHz duplex radio technology, ensuring the safest most reliable system on the market today. Utilizing a 12 volt powered cradle that mounts to any forklift or mobile equipment, the Access 1000 is a perfect solution for warehouses and distributions centers.

Features:
• For use in facilities with up to 1,000 industrial overhead doors or gates
• Optional powered forklift mount for efficiency and safety
• Robust and user friendly system ideal for most manufacturing or warehouse operations
• 900 MHz frequency, 2-way digital radio technology
• System secured utilizing 16.7 million unique address codes
• Receiver equipped with a detachable memory card for business critical applications using a large base of transmitters
• Weather resistant, IP65 rated

Overall Specifications:
• Operating Frequency: 926.5 MHz
• Power Output: <5 mW
• Transmission Principle: GMSK, TDMA
• Operating Temperature: -13°F - 131°F (-25°C - +55°C)
• Storage Temperature: -40°F - 185°F (-40°C - +85° C)

Receiver Specifications:
• Enclosure Rating: IP65
• Power Supply: 115 VAC 60 Hz 15 mA, 4AT fuse / 12/24 VDC Available
• Max Switching Capacity of Relays: 2A/250VAC
• Total Load On All Relays: 4A/250VAC (not exceeding 2A on any single relay)
• Relay-Type: SPDT
• Dimensions: 135 x 120 x 50 mm
• Weight: 450g
• Screw Size: TX20

Transmitter Specifications:
• Enclosure Rating: IP67
• Dimensions: 5.3" x 4.7" x 1.9" (120 x 75 x 30 mm)
• Weight: .4 lbs (200g)
• Battery Type: (2) AA Alkaline batteries
• Screw Size: PH2

The Telechief® Series are compact, hand-held 4, 6, and 8 button radio remote controls that are suited to a variety of remote control applications. These controls are an ideal solution for (but not limited to) lift tables, transfer cards, chain hoists, boat ramps, conveyor systems, and tailgate lifts.

Features:
• Puts operator in control at a safe distance
• Long range operation up to 328 ft. (100 meters)
• Operation frequency: 310-330MHz fully compliant with FCC Part 15 & CE European directive (non-licensed system)
• Configurable auxiliary contact (RO) for normal open/closed operation
• Very efficient power management allows long battery life
• 32-bit security code (4.1 billion addresses)
• Operation temperature -45° ~ +80° C
• 1 year warranty from date of purchase
• NEMA 4/IP65 rated enclosures
• Advance compact circuit design
• 80 operating channels
• Error detection and correction
• Glass fiber/ ABS construction

Transmitter Specifications:
• Very lightweight (115 g) with batteries
• Uses 2 standard AA alkaline batteries
• Includes low power indicator
• Jammed button detection
• Modulation: FM
• Internal antenna
• Shock resistant
• Very low power consumption
• Long battery life

Receiver Specifications:
• Multiple suppAvailable AC or DC powerly voltages
• Available AC or DC power
• Power~on/mainline contact
• LED display of power and contact closure status
• Sensitivity: Approx ~ 105 dBm
• Pre~wire 6ft. (1.83 meter) cable
• Control relay rating 10A at 125 VAC 5A at 250 VAC 8A at 30 VDC
• 4~point shock mount designed for demanding mobile and industrial applications
• Independent common configuration for mixed control voltage applications

Raymote® Infrared Remote Control systems offer the ultimate in frequency-free wireless control solutions. A perfect fit for industrial applications involving over-head cranes, hoists and other equipment where the operator's ability to see and assess the situation is essential. Strategically placed sensors enable safe, restrictive operating range.

Features:
• Line of sight safety
• No radio frequency interference
• No FCC license required
• Easy to install
• Uses affordable, off-the-shelf battery power
• Controllable sensor placement lets you define operational area
• Multiple system capability
• Simultaneous command capability

The Summit Series remote control systems are designed to replace those cumbersome, hard-wired pendants.  Our Summit Series remote control systems can provide up to five-motion control in either a single or dual speed pushbutton transmitter.  These radios ensure safe, wireless operation of your equipment at an excellent value.

Features:
• Puts operator in total control of equipment from plant floor
• Long range operation of up to 1000 ft. (8 power settings available)
• Red Mushroom push-button (mainline contractor control)
• Prewired receiver for quick installation
• Two (2) speed (SK2400) 4 motion models
• IP65 rated glass reinforced nylon enclosures
• One (1) year warranty from date of purchase
• Operation frequency: 430 ~ 435 MHz fully compliant with FCC Part 15 un-licensed and CE European directive (non-licensed system)
• Start up/Shut down (No external alarm needed)

General Specifications:
• Phase Lock Loop (PLL Synthesized)
• Power source and output relay fuse protection
• Auto signal searching
• More than 57 function and parameter setting*
• Operating temperature:-40° C ~ + 85° C
• 70 operating channels
• Relays rated 10A at 250V & SA at 30VDC

Transmitter Specifications:
• Three (3) Stage audible and visual low power warning
• Internal audible and visual alarm
• Removable magnetic key (water resistant)
• Shock resistant design impact durability to 50G
• RF output power < 10mW
• Large pushbutton remote shutdown switch
• Internal antenna
• Runs on four (4) standard AA alkaline batteries

Receiver Specifications:
• Power interruption protection
• Relay contact failure detection circuit
• Shock resistant mounting provision, impact durability up to 20G
• External integrated antenna
• Supply voltage 115/230/380 50/60 Hz + 10%

The TM2200HT hand-held, 2-speed, industrial remote control is part of the TeleChief® Series family and is the ideal solution for your industrial equipment applications. These rugged, weather-resistant remote controls can provide your operators safe, convenient control over 300 feet. This 2-speed system is a compact, hand-held radio remote control system that is suited for (but not  limited to) hoist and trolley applications.

Features:
• Long range operation of up to 330 ft. (100 meters)
• Water resistant
• 2 speed pushbuttons with distinct position feedback
• Operation frequency: 310~320 MHz fully compliant with FCC Part 15 and CE European directive (non-licensed system)
• Removable magnetic key
• Large red emergency stop button
• Available in either AC or DC
• 1 year warranty from date of purchase
• NEMA 4/IP65 rated enclosures
• 32~bit security code (4.1 billion addresses)
• Error detection and correction

Transmitter Specifications:
• Very lightweight (115 g) with batteries
• Uses 2 standard AA alkaline batteries
• Includes low power indicator
• Jammed button detection
• Internal antenna
• Shock resistant
• Long battery life

Receiver Specifications:
• Multiple supply voltages DC TYPE: 12~24 volts VDC AC TYPE: 48/110/220 VAC
• LED display of power and contact closure status
• Dimensions: 6.5 x 3 x 2 (HxWxD)
• Pre-wire 6ft. (1.83 meter) cable
• Control relay rating 10A at 125 VAC 8A at 30 VDC
• 4~point shock mount designed for demanding mobile and industrial applications