FP1 Fusible Pipe Plug
45° Brass Flare Fittings
Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or steel tubing
• –65° to +250° F. temperature range
• Standard fittings use short nuts. Long nuts are available for higher vibration applications
• Resists mechanical pullout
• Easy to disassemble and can be reassembled many times, with no effect on the seal
• Primary uses: fuel equipment, plumbing, gases, refrigeration, and vacuum lines
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or steel tubing
• –65° to +250° F. temperature range
• Standard fittings use short nuts. Long nuts are available for higher vibration applications
• Resists mechanical pullout
• Easy to disassemble and can be reassembled many times, with no effect on the seal
• Primary uses: fuel equipment, plumbing, gases, refrigeration, and vacuum lines
Items |
/Asset/Andeson FP1 Fusible Pipe Plug.jpg 06060-02 FP1 Fusible Pipe Plug |
/Asset/Andeson FP1 Fusible Pipe Plug.jpg 06060-04 FP1 Fusible Pipe Plug |
/Asset/Andeson FP1 Fusible Pipe Plug.jpg 06060-06 FP1 Fusible Pipe Plug |
|||
Tube OD | N/A 1/8 | N/A 1/4 | N/A 3/8 | |||
Note | N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects | |||||
Manufacturer | N/A Anderson Metals Corporation | |||||
|