Features:
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or steel tubing
• –65° to +250° F. temperature range
• Seats and threads are recessed, protecting them
• Shorter overall length, for limited space applications
• Shorter nut allows tubing to be bent closer to fitting
• Fair vibration resistance
• Resists mechanical pullout
• Easy to disassemble, and can be reassembled many times, with no effect on the seal
• Primary uses: liquids, gases, and hydraulic brake systems
To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut on tube—threads facing end
3. Flare end of tube
4. Thread nut onto body until snug, then 1/6th turn
Tube OD |
N/A 1/2 x 3/8 |
Manufacturer |
N/A Anderson Metals Corporation |
Note |
N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects |
