Jamieson Equipment Co., Inc. - 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)

Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.

To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose

Items	07215-0403 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)	07215-0404 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)	07215-0405 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)	07215-0606 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)	07215-0808 129P015 Push-On Brass Hose Barbs (Barb I.D. Tube Shank)
Hose I.D.	N/A 1/4 x 3/16	N/A 1/4 x 1/4	N/A 1/4 x 5/16	N/A 3/8 x 3/8	N/A 1/2 x 1/2
Note	N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer	N/A Anderson Metals Corporation