Jamieson Equipment Co., Inc. - 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat

Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.

To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose

Items	07209-0402 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat	07209-0404 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat	07209-0406 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat	07209-0604 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat	07209-0606 129P09 Push-On Brass Hose Barbs NPSM Gasket Seat
Hose I.D.	N/A 1/4 x 1/8	N/A 1/4 x 1/4	N/A 1/4 x 3/8	N/A 3/8 x 1/4	N/A 3/8 x 3/8
Note	N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer	N/A Anderson Metals Corporation