Print Back

Features:
• One piece construction
• Use with push-on type hose
• No hose clamp or ferrule needed
• Excellent vibration resistance
• Barb size is hose I.D.


To Assemble:
1. Cut smooth, square end on hose
2. Insert fitting until all barbs are covered
3. Place end of fitting against a flat object, grip hose one inch from end
4. Push until cap covers end of hose

129P04
Items 129P04
07204-0404
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
129P04
07204-0405
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
129P04
07204-0406
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
129P04
07204-0604
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
129P04
07204-0605
129P04 SAE Flare Push-On Brass Hose Barbs (Barb x 45° Flare)
Hose I.D. N/A 1/4 x 1/4 N/A 1/4 x 5/16 N/A 1/4 x 3/8 N/A 3/8 x 1/4 N/A 3/8 x 5/16
Note N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer N/A Anderson Metals Corporation