Print Back
Features:
• High quality all brass three piece construction with eyelet and o’ring seal
• Meets D.O.T. FMVSS71.106 and SAE J1131 standards for air brake system requirements
• -40° to +200° F temperature range
• Use with nylon tubing that complies with SAE J 844
• Pre-applied Teflon® based pipe sealant on all conical male pipe threads,saves assembly time, as well as installation labor
• A 20% reduction in size over the original push-in design helps assembly in limited space applications and reduces weight
• A new patented double bite collet for greater holding power provides a 37% increase in pullout performance over the original design
• Unique patented swivel design on elbows and tees provide full flow capabilities
• Captive eyelet with extended length is for easy assembly and allows for full flow. Top end radius eliminates scoring of tubing I.D.
AQ68DOT
Items AQ68DOT
02468-5300
Quik-Dot® Brass Push-In Tube Fittings AQ68DOT - Connector
AQ68DOT
02468-5302
Quik-Dot® Brass Push-In Tube Fittings AQ68DOT - Connector
AQ68DOT
02468-0402
Quik-Dot® Brass Push-In Tube Fittings AQ68DOT - Connector
AQ68DOT
02468-0404
Quik-Dot® Brass Push-In Tube Fittings AQ68DOT - Connector
AQ68DOT
02468-0406
Quik-Dot® Brass Push-In Tube Fittings AQ68DOT - Connector
Tube OD N/A 5/32 x 10-3/2 N/A 5/32 x 1/8 N/A 1/4 x 1/8 N/A 1/4 x 1/4 N/A 1/4 x 3/8
Temperature Range (°F) N/A - 40 to + 200
Note N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer N/A Anderson Metals Corporation