Jamieson Equipment Co., Inc. - Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee

Features:
• High quality all brass three piece construction with eyelet and o’ring seal
• Meets D.O.T. FMVSS71.106 and SAE J1131 standards for air brake system requirements
• -40° to +200° F temperature range
• Use with nylon tubing that complies with SAE J 844
• Pre-applied Teflon® based pipe sealant on all conical male pipe threads,saves assembly time, as well as installation labor
• A 20% reduction in size over the original push-in design helps assembly in limited space applications and reduces weight
• A new patented double bite collet for greater holding power provides a 37% increase in pullout performance over the original design
• Unique patented swivel design on elbows and tees provide full flow capabilities
• Captive eyelet with extended length is for easy assembly and allows for full flow. Top end radius eliminates scoring of tubing I.D.

Items	02571-0402 Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee	02571-0404 Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee	02571-0604 Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee	02571-0606 Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee	02571-0806 Quik-Dot® Brass Push-In Tube Fittings AQ71DOTS - Swivel Tee
Tube OD	N/A 1/4 x 1/8	N/A 1/4 x 1/4	N/A 3/8 x 1/4	N/A 3/8 x 3/8	N/A 1/2 x 3/8
Temperature Range (°F)	N/A -40 to 200
Note	N/A These products contain lead and are not allowed by Federal Law to be installed for potable water use in the U.S.A. and its territories. WARNING: Furthermore, these products contain a chemical known to the State of California to cause cancer, birth defects
Manufacturer	N/A Anderson Metals Corporation