Print Back

Features:
• Sleeve and nut permanently attached
• Sleeve is visible after installation, helping to eliminate misaligned sleeves
• Two piece construction – nut and body
• Use with copper, brass, aluminum, or plastic tubing (plastic requires insert 61P)
• –65° to +250° F. temperature range
• Quicker assembly than flare or regular compression
• Better vibration resistance than regular compression fittings
• Can be used anywhere a regular compression fitting is used, especially when installation may be difficult

To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut over tube, threads facing end
3. Insert tube into fitting
4. Thread nut onto fitting until snug, then one more turn

70SA Elbow
1 

Item #

Tube OD

00270-0202 N/A 1/8 x 1/8
00270-0302 N/A 3/16 x 1/8
00270-0402 N/A 1/4 x 1/8
00270-0406 N/A 1/4 x 3/8
00270-0408 N/A 1/4 x 1/2
00270-0502 N/A 5/16 x 1/8
00270-0504 N/A 5/16 x 1/4
00270-0602 N/A 3/8 x 1/8
00270-0604 N/A 3/8 x 1/4
00270-0606 N/A 3/8 x 3/8
00270-0608 N/A 3/8 x 1/2
00270-0612 N/A 3/8 x 3/4
00270-0804 N/A 1/2 x 1/4
00270-0806 N/A 1/2 x 3/8
00270-0808 N/A 1/2 x 1/2
00270-0812 N/A 1/2 x 3/4
00270-1008 N/A 5/8 x 1/2
00270-1012 N/A 5/8 x 3/4
00270-1208 N/A 3/4 x 1/2
00270-1212 N/A 3/4 x 3/4
1