Features:
• NTEP-Certified, CC #02-003
• 100,000 lb Concentrated Load Capacity (CLC)
• 100,000 lb Dual Tandem Axle (DTA)
• Up to 270,000 lb full scale capacity
• Span deflection ratio (1:1100) for legal highway loads
• Three standard widths: 10, 11, and 12 ft (available up to 16.5 ft, NTEP-Certified)
• 75,000 lb capacity load cells and G-Force™ mount assemblies
• Junction box(es) appropriate for number of load cells utilized
• Boltless, top access to load cells and junction box
• Boltless, self-seating module hinge connections

The SURVIVOR OTR Series truck scale is an outstanding design that incorporates the most advanced engineering and production technology to manufacture the highest quality vehicle weighing system in the marketplace. For applications where steel is preferred or downtime is critical, choose the SURVIVOR® OTR Steel Deck. Operational within a day, the easy-to-install SURVIVOR OTR Steel Deck sets the standard for truck scale design and performance, keeping downtime to a minimum. Tightly spaced wide-flange I-beams form the industry's strongest weighbridge design, weighing as many as 250 trucks per day for 25 years without a trace of weighbridge fatigue.

Weighbridge Design

The weighbridge on the OTR steel deck model consists of a diamond checkered steel top plate welded on top of twelve 12-inch wide-flange, 14 pound structural I-beams. The wide flange beam construction helps minimize span deflection and lengthens the life of your truck scale. The beams are positioned longitudinally with the traffic flow, a design based on interstate bridge designs intended to last 100 years. With our longitudinal design, each tire is fully supported by the top plate and a wide flange beam below, eliminating the longitudinal ruts associated with competitive designs that utilize structural shapes instead of heavy bridge iron. In addition, a steel deck weighs less, which makes it easier to move or relocate if necessary.

Load Cells and Mounting System

Each load cell has an individual capacity of 75,000 pounds, compared to only 50,000 pounds in many competitive models. Higher capacity load cells handle heavier loads with far fewer failures. Wire-braided copper transient bypass cables are provided at each load cell mount for individual load cell protection from direct lightning strikes to the scale or weighbridge. Load cells and electronic components have top access through the scale deck, allowing for convenient maintenance, even where space is limited.

Breathing Room Below

The Steel Deck OTR features an open-bottom design. The open-bottom design allows unrestricted airflow, eliminating the cavity where rust-causing moisture can build up.

Durable Finish

All SURVIVOR scales are thoroughly cleaned before painting to remove mill scale, oils or other surface contaminants. An asphalt undercoating is applied to the interior and underside of the entire scale. A high-performance epoxy primer is applied to all steel before the specialized hard-coat alkyd enamel completes the process.

Lightning Protection

Every SURVIVOR truck scale comes complete with a surge voltage protection system. The junction box is provided with individual transient circuitry protection. The entire system is grounded to a single-point grounding system connected to the power ground. With the introduction of single point grounding, you will not experience the loss of load cells associated with other competitive designs.

Easy Expansion

Versatile and cost-effective, the OTR was designed to change with your business. Heavy-duty, self-seating hinge connectors offer easy installation of the pre-assembled modules, and simplify future expansion.