Jamieson Equipment Co., Inc.
5314 Palmero Court,
Buford, GA 30518
Phone: 678 745 3020 • Fax: 678 745 3028
Email: sales@jamiesonequipment.comWebsite: www.jamiesonequipment.com
All Products > Hose & Fittings > Fittings > Brass Compression Fittings > 65R Reducing Elbow (Compression x Compression) > Item # 00085-0806  


Item # 00085-0806, 65R Reducing Elbow (Compression x Compression)


Features:
• Three piece construction—nut, sleeve (or ferrule) and body
• Use with copper, aluminum, or plastic tubing (plastic requires 60P sleeve and 61P insert)
• –65° to +250° F. temperature range
• Standard fittings use short nuts. Long nuts are available for higher vibration applications.
• Easy to disassemble, no flaring tool required
• Primary uses: water, gasoline, oil, and vacuum lines

To Assemble:
1. Cut smooth, square end on tubing
2. Slide nut, then sleeve onto tube.
Threads must face end
3. Insert tube into fitting
4. Thread nut onto fitting until snug, then as follows:
• up to 1/4": 1 1/4 turns
• up to 5/16": 1 3/4 turns
• 3/8″ and up: 2 1/4 turns





 Specifications 

Tube OD

1/2 x 3/8

Manufacturer

Anderson Metals Corporation



Print Back