The 3DLevelScanner HT is designed to measure the level and estimate the volume in storage silos containing challenging materials such as clinker, alumina, frac sand and fly ash. This model of the 3DLevelScanner has an operating temperature range of up to 356°F (180°C) to accommodate higher temperatures that may be present when material that has been heated in the production process is conveyed into storage silos. The 3DLevelScanner HT is ideal for use in the cement, aluminum, mining and power industries where there are multiple challenges such as dust or high humidity and very large silos where the material surface in the bin may be uneven and difficult to measure.

In the manufacturing process, materials such as clinker, alumina, frac sand or fly ash may be conveyed into the silo when they are still relatively hot. The 3DLevelScanner HT is designed to withstand these higher temperatures while maintaining a high level of measurement accuracy, unlike some non-contact devices that are prone to becoming unreliable in harsh environments. The 3DLevelScanner has been proven to perform in a wide variety of materials including heavy lump material like clinker, fine granular materials like alumina oxide or silica sand, or powdered materials such as fly ash.

Features:
• Operating temperature range of up to 356°F (180°C)
• Continuous and non-contact measurement
• Measures uneven powder or solid material surfaces
• Detects cone up, cone down and sidewall buildup
• Provides minimum, maximum and average distances
• Performs in extreme levels of dust
• Calculates highly accurate bin volume
• Communications include 4-20/HART, Modbus RTU, TCP/IP and RS-485
• Measuring range up to 200 feet
• Self-cleaning with minimal maintenance

Specifications:
• Preferred Applications: Powders and solids
• Measuring Range: 200 feet (61 meters)
• Process Temperatures: -40°to +356°F (-40°to +180°C)
• High Temp Process Pressure: -0.2 – 3 bar (-2.9 to 14.5 psi)
• Signal Output: 4-wire 4 - 20 mA/HART/RS-485/Modbus
• Emitting Frequency: 3 KHz to 10 KHz
• Supply Voltage: 20 to 32 VDC
• Power Consumption: Max 1.5 W at 24 VDC
• Hazardous Locations: CFM Intrinsically Safe Class I, II, Division I, Groups C, D, E, F, G (US & Canada)

Applications:
• Measuring the level and estimating the volume in storage silos containing high temperature materials
• Appropriate for silos experiencing high dust and humidity
• Large silos with uneven and difficult to measure material surface
• Challenging materials such as clinker, alumina, frac sand and fly ash
• Industries including cement, power, aluminum and frac sand