Universal power supply 24 to 240 VAC/VDC with LED status light, Triple Thread Screw off Cover, Dual Conduit Entries, DP/DT Relay contacts, Selectable Fail-Safe Protection, USDA Approved Powder Coated Finish, Flush Mount Probe with build-up shield. Hazardous Location Approved, C/US listed for Class I, Groups E, F, G.
Unit of Measure
Specifications
Model |
N/A PROCAP XI FL |
Voltage |
N/A 24 TO 240 VAC/VDC |
Manufacturer |
N/A BinMaster |
Power Requirements |
N/A 120/240 VAC 50/60 Hz ±15%, 5VA |
Output Relay |
N/A DPDT 10 Amp at 250 VAC |
Ambient Temperature Range |
N/A -40 to 85 ºC-40 to 185 ºF |
Sensor Temperature Range |
N/A 150ºF Standard (65ºC) 450ºF High Temp (232ºC) |
Pressure |
N/A 250 psi, Flush Mount |
Sensitivity Setting |
N/A Adjustable Sensitivity to < 1 PicoFarad |
Calibration |
N/A “Quick Set” Coarse/Fine Single Turn Potentiometers |
Fail-Safe Mode |
N/A Switch Selectable High/Low |
Time Delay |
N/A Adjustable 0.25 to 10 Seconds |
Enclosure |
N/A Cast Aluminum, Bolt-On Cover USDA Approved Finish |
Conduit Entry |
N/A 3/4" NPT |
Mounting |
N/A Flush Mount, Non-Invasive |
PRO-Shield |
N/A Compensates for Material, Build-up on Sensing Probe |
| Approval Ratings1 | N/A NRTL/C, Ratings: NEMA 4X, 5 and 12 |
Status Indicator |
N/A Visual LED indicates sensor status: uncovered, covered and power failure |
Prob Options |
N/A High Temperature Sensor Standard Sensor |
- 1 Note: Also available are Explosion Proof model is for Class I Group C & D and Class II Group E, F, and G
