M2000 Spherical Roller Bearings
Moline M2000 Mounted Spherical Bearings are suitable for a wide variety of applications. They work exceptionally well in situations where a high capacity align-able bearing is required. They are available in a wide range of shaft sizes and a variety of popular mounts.
Moline M2000 Pillow Blocks, 4-Bolt Flange Bearings, Piloted Flange Bearings and Wide Slot Take-up Bearings are ready to slip onto the shaft when received because they are completely assembled, adjusted, sealed and pre-lubricated at the factory. The self-aligning feature provides for speedy mounting with a minimum of field adjustment required. The housings are ruggedly designed and made in the USA of Class 30 cast iron.
Features:
• Available in shaft sizes from 1-3⁄16 to 5"; and 40 to 130mm
• +/- 1-1⁄2" misalignment capacity
• Available in Expansion (red tag) and Non-Expansion (yellow tag) styles
• Expansion units have .100" capacity
• Single piece outer race
• 3 lube holes and groove in outer race
• Precision ground contours
• Will accommodate moderate thrust loads
• Permits angular misalignment without loss of capacity
• Long rollers allow for greater contact
• Standard grease operating temperature is up to 250°, high temperature grease is available up to 350°
• Housings available in the standard painted finish. Powder coating in RAL or custom colors, Stainless Steel Powder coating, Nickel plating, Epoxy and Teflon coatings available on request
• Custom machining and design is available upon request, please call the factory for more information
• Rotating center guide ring for least possible friction
• Housings are made in the USA of Class 30 cast iron
• Piloted Flange housings are machined with back-out holes
• Comes with a Triple Lip Contact Seal standard, also available with Labyrinth Seals for high speed applications and with Spring Loaded Garter Seals for dirty and wet applications
• Made in the United States
M3000 Even-Lok Spherical Roller Bearings
The latest addition to the Moline line, the M3000 Even-Lok™ mounted spherical bearing uses a built-in mechanical connector that applies a near 360° concentric grip and almost a 100% interface with the surface of the shaft. This unique locking mechanism helps eliminate vibration and slippage between the mating surfaces. An excellent choice for screening and conveying, material and air handling, or industrial laundry applications, where there are problems with fretting corrosion, slippage on the shaft, or vibration. Moline’s M3000 Even-Lok™ spherical roller bearing will help.Save costly down time and expense by using this exciting new bearing.
Type-E Tapered Roller Bearings
Moline Type E Tapered Roller Bearings offer many advantages including high-speed suitability, positive locking to the shaft, ruggedness, and low price.
The housings are as compact as possible without sacrificing their brawny ruggedness. Made in the USA of high quality Class 30 cast iron, they are precision machined to close tolerances.
On each end of the inner race there is a Drive Collar with two headless set screws spaced 120° apart. These extend through clearance holes in the inner race, locking it to the shaft.
/Asset/Type E 2 Bolt Pillow Block.jpg
Mounted Spherical Roller Bearings
Moline M2000 Mounted Spherical Bearings are suitable for a wide variety of applications. They work exceptionally well in situations where a high capacity align-able bearing is required. They are available in a wide range of shaft sizes and a variety of popular mounts.
Moline M2000 Pillow Blocks, 4-Bolt Flange Bearings, Piloted Flange Bearings and Wide Slot Take-up Bearings are ready to slip onto the shaft when received because they are completely assembled, adjusted, sealed and pre-lubricated at the factory. The self-aligning feature provides for speedy mounting with a minimum of field adjustment required. The housings are ruggedly designed and made in the USA of Class 30 cast iron.
