Pneumatic Rotary BB Series Ball Vibrators
(6)The BB Series can be equipped with a muffler on the threaded exhaust port. The threaded exhaust also allows oily exhaust air to be piped away from the area of operation if absolute cleanliness is required. These dual mounting position vibrators are designed for applications requiring a small to medium amount of vibration, applications such as laboratory equipment, small hoppers, parts feeders, chutes and match plates. /Asset/Vibco_BB130_Pneumatic_Ball_Vibrator.jpg
Pneumatic Rotary BS Series Ball Vibrators
(4)
BS Series Ball Vibrators feature a single-bolt base and side inlet and exhaust ports. Force pounds range from 25-230 and vibrations per minutes range from 5,700 to 22,000 at pressures from 20-60 psi.
Pneumatic Rotary BV Series Ball Vibrators
(7)The BV Series, like other ball vibrators, require lubrication. These rugged vibrators will withstand continuous operation at high temperatures up to 350º by maintaining constant low pressure at 5 to 10 PSI through the unit when not in operation. The easily exchangeable ball races meeker them easy to repair providing prolonged life at a small cost. The top air outlet port allows discharged air to be silenced with a muffler or piped aware from the area of operation if absolute cleanliness is required. /Asset/Vibco_BV250_Pneumatic_Ball_Vibrator.jpg
Pneumatic Rotary CS Series Ball Vibrators
(3)
CS Series Ball Vibrators feature a two-bolt base and side inlet and exhaust ports. Ball diameters are from 19-35 millimeters. Force pounds range from 100-390. Vibrations per minute are from 5,300 to 14,000, at pressures from 20-60 psi.
Pneumatic Rotary DS Series Ball Vibrators
(2)
DS Series Ball Vibrators feature a four-bolt base and side inlet and exhaust ports. Ball diameter are from 41-51 millimeters. Force pounds range from 240-680. Vibrations per minute range from 3,100 to 4,400, at pressures from 20-60 psi.
Pneumatic Rotary K Series Ball Vibrators
(8)
The K Series Pneumatic Ball Vibrators are composed of a rustproof extruded aluminum body fitted with hardened steel races on which a steel ball rotates. Nylon end plates are located on either side to contain the ball and prevent the entry of dust and water, thus allowing the unit to be used in dusty or wet environments. Inlet and exhaust ports have standard pipe threads, allowing the exhaust air to be piped away if necessary. The K Series Models can be installed in areas with temperatures up to 212°F. Two pairs of mounting holes are provided for either vertical or horizontal mounting. K Series ball vibrators are small in overall size. Frequency and force can easily be regulated by adjusting the supply air pressure between 20 and 80 p.s.i. This ease of adjustment makes them extremely versatile when used for:
• Aiding material flow from bins and hoppers
• Preventing bottles and other small objects from clogging conveyor systems
• Compacting material in containers or molds
• Particle sizing on vibrating screens
Inlet Fitting and Exhaust Muffler are included with each K Series Vibrator.
Pneumatic Rotary S-Type Ball Vibrators
(8)
S-Type External Pneumatic Ball Vibrators develop frequencies of up to 35,000 RPM and they are used wherever powdery materials have to be moved. S-type Ball Vibrators are installed on bins to prevent bridging or rat holing, and for the improvement of material flow on chutes, screens and vibrating tables. S-type Ball Vibrators consist of an anodized aluminum body inside which a steel ball rotates on a specially hardened and ground steel ring. For operation a 2/2-way-valve and filtered compressed air are required. Maintenance-free; operating temperature from 32°F to 390°F; oil-free operation possible; high centrifugal force; low air consumption; standard ATEX II3D certified.
Pneumatic Rotary US Series Ball Vibrators
(5)
US Series Ball Vibrators feature a two-bolt base and top inlet and exhaust ports. The ball diameters are from 13 to 44 millimeters. Force pounds are from 45 to 600, the vibrations per minute are from 3,500 to 20,000, at pressures from 20 to 60 psi.
Pneumatic Rotary V Series Ball Vibrators
(8)
Compressed air drives a highly chrome-finished and hardened steel ball around a hardened, highly-ground and polished ball race at a high rate of speed to produce high frequency vibration. Ball vibrators require clean air and lubrication.
Pneumatic Rotary SK Series Light Ball Weight Vibrators
(7)
SK Series Vibrators are constructed of a high molecular composite material to be lightweight, rust resistant, and durable for tough applications. One-piece sealed construction makes the SK Series a great choice for installation in many harsh environments. The durable design and quality construction of the SK Series ensure reliable performance and long service life.
There are seven models available with force outputs up to 1000 lbs/force at 80 p.s.i. When installed in combination with a Houston Vibrator Lubro-Control Unit, Force and frequency of SK Series Vibrators can be adjusted by varying supply air pressure between 20 and 80 p.s.i.
/Asset/HVI_Series_SK_Ball_Vibrator.jpg
Pneumatic Rotary H Series Heavy Duty Ball Vibrators
(10)
H-Series Iron Body Ball Vibrators are available in two different mounting styles, and feature three different inlet/exhaust configurations. There are ten models to choose from in all.
Because of their various designs, these vibrators can be installed on many types of containers and machines.
Frequencies range from 2100 to 21,000 VPM, with forces to 800 pounds, depending on model and air pressure.
/Asset/HVI H Series Ball Vibrator.jpg
Pneumatic Rotary Vibra-Ball VBB Ball Vibrator
(4)
The Cleveland Vibrator Co. lines of industrial ball pneumatic vibrators feature a wide range of force ranges and construction types for handling material flow challenges. Pneumatic ball vibrators are most commonly used as discharge flow aids on small to medium-size bins, hoppers and chutes. They are used in a variety of applications within the chemical, foundry and concrete industries. Pneumatic ball vibrators feature a high quality ductile iron housing. These bodies are designed to quickly and easily mount to equipment.
DURABLE - designed and constructed for continuous duty
SAFE - options provided to reduce noise levels while compressed air power allows for operation in hazardous areas
VERSATILE - wide range of vibration intensities and design types allow for flexibility in mounting angles, force outputs, material loads and applications
EASY - all industrial vibrators come with mounting fasteners for quick set-up
Pneumatic Rotary Vibra-Ball VBC Ball Vibrator
The Cleveland Vibrator Co. lines of industrial ball pneumatic vibrators feature a wide range of force ranges and construction types for handling material flow challenges. Pneumatic ball vibrators are most commonly used as discharge flow aids on small to medium-size bins, hoppers and chutes. They are used in a variety of applications within the chemical, foundry and concrete industries. Pneumatic ball vibrators feature a high quality ductile iron housing. These bodies are designed to quickly and easily mount to equipment.
DURABLE - designed and constructed for continuous duty
SAFE - options provided to reduce noise levels while compressed air power allows for operation in hazardous areas
VERSATILE - wide range of vibration intensities and design types allow for flexibility in mounting angles, force outputs, material loads and applications
EASY - all industrial vibrators come with mounting fasteners for quick set-up
Pneumatic Rotary Vibra-Ball VBD Ball Vibrator
(2)
The Cleveland Vibrator Co. lines of industrial ball pneumatic vibrators feature a wide range of force ranges and construction types for handling material flow challenges. Pneumatic ball vibrators are most commonly used as discharge flow aids on small to medium-size bins, hoppers and chutes. They are used in a variety of applications within the chemical, foundry and concrete industries. Pneumatic ball vibrators feature a high quality ductile iron housing. These bodies are designed to quickly and easily mount to equipment.
DURABLE - designed and constructed for continuous duty
SAFE - options provided to reduce noise levels while compressed air power allows for operation in hazardous areas
VERSATILE - wide range of vibration intensities and design types allow for flexibility in mounting angles, force outputs, material loads and applications
EASY - all industrial vibrators come with mounting fasteners for quick set-up
Pneumatic Rotary Vibrolator® ABF Ball Vibrator
(7)
This industrial ball vibrator delivers pneumatic power through rotational force providing the highest ratio of force for big jobs like removing material blockages from large or rigid bins, hoppers and chutes.
Patented by Martin Engineering, Vibrolator® vibrators are the original ball vibrators and still provide a reliable and efficient solution to flow problems.
Features and Benefits:
• Continuous Duty
• Highest ratio of force to physical weight in the industry
• Tapped exhaust
• Muffler is standard
• O-ring sealed
• Interchangeable with other manufacturers
• Three mounting and port configurations available
• Provide continuous vibration over long life with minimal service attention.
• One moving part - a chrome steel ball rolls in hardened tool steel races - eliminates vibrator service requirements.
Options:
• Selection includes vibrator designs for extreme temperatures, and submerged or sanitary conditions.
Pneumatic Rotary Vibrolator® ABL Ball Vibrator
(5)
This industrial ball vibrator delivers moderate force for small industrial hoppers, chutes, match plates, light sifting or industrial feeders and lab testing.
Patented by Martin Engineering, Vibrolator® vibrators are the original ball vibrators and still provide a reliable and efficient solution to flow problems.
Features and Benefits:
• Continuous Duty
• Highest ratio of force to physical weight in the industry
• Tapped exhaust
• Muffler is standard
• O-ring sealed
• Interchangeable with other manufacturers
• Three mounting and port configurations available
• Provide continuous vibration over long life with minimal service attention.
• One moving part - a chrome steel ball rolls in hardened tool steel races - eliminates vibrator service requirements.
Pneumatic Rotary Vibrolator® ABU Ball Vibrator
(7)
This pneumatic vibrator is ideal for knocking down material blockages and is built for the toughest conditions.
Patented by Martin Engineering, Vibrolator® vibrators are the original ball vibrators and still provide a reliable and efficient solution to flow problems.
Features and Benefits:
• Continuous Duty
• Highest ratio of force to physical weight in the industry
• Tapped exhaust
• Muffler is standard
• O-ring sealed
• Interchangeable with other manufacturers
• Provides continuous vibration over long life with minimal service attention.
• One moving part - a chrome steel ball rolls in hardened tool steel races - eliminates vibrator service requirements.
