Model B Snubnose Concrete Reclaimer
The Model B SNUBNOSE Reclaimer is the “workhorse” of BFK Reclaimers.
Capable of reclaiming from 1/2 up to 1 yard-per-minute, the SNUBNOSE can reclaim at twice the rate of some competitive models, allowing your trucks to wash-out and get back under the plant as quickly as possible.
The patented design is an excellent choice for many Ready-Mix plants due to it’s combination of speed, simplicity, and compact size.
Available in Left– or Right—Hand Sand Screw Discharge to fit your plant. Optional Sand Screw Heater package, and Automatic Start/Stop also available.
Only BFK has eliminated Grease Fittings, Shaft Seals, and Shaker Decks, making them the most user-friendly and affordable Reclaimers available!
A Reclaimer so simple, you can install, operate and maintain it yourself, without the need of a factory technician!
/Asset/BKF Model B Snubnose Concrete Reclaimer.jpg
Model B² Snubnose Concrete Reclaimer
The Model B² Side-by-Side SNUBNOSE Reclaimer System offers the ability to reclaim from 1 up to 2 yards-per-minute, from 4 trucks at once, with the added benefit of Redundancy!
Competitive brands offer discharge “buffers” to feed their reclaimers, which only deliver about 1/3 yard-per-minute! That’s right, it takes 3 minutes to reclaim 1 yard—up to 6 times slower than the BFK!
In addition, if either the buffer or the reclaimer goes down, you’re done reclaiming until you get it fixed!
Not with a B² system. If one Reclaimer becomes in-operable, you still have the ability to reclaim!
Model M6 Concrete Reclaimer
The Model M6 Reclaimer fits so many installations never before even attempted by other reclaimer manufacturers.
Capable of reclaiming 1 to 3 yards-per-hour, the M6 handles the small loads you need, without the price or size of a large reclaimer.
The M6 can work as a stand-alone reclaimer, or come equipped with a wide variety of infeed hoppers, troughs, and pre-feeders to do the job you need done!
/Asset/BFK Model M6 Concrete Reclaimer 1.jpg
Model R2 Concrete Reclaimer
The Model R2 Reclaimer is used where separation of rock and sand is not necessary.It is also a good fit for plants that need to separate small amounts of solids from rather large quantities of slurry water, such as plants running GFRC or other specialty mix designs.
Capable of reclaiming 1 to 3 yards-per-hour, the R2 captures solids larger than 35 mesh [0.5mm, or 0.0197”], including many fibers.
The R2 can be fitted with a wide variety of infeed hoppers and a Star Prefeeder to do the job you need done! /Asset/BFK Model R2 Concrete Reclaimer 1.jpg
Model X1 Six-Shooter Concrete Reclaimer
The Model X1 SIX-SHOOTER Reclaimer is ideal for plants with lesser amounts of daily waste concrete, such as smaller ready-mix producers, smaller satellite plants, even some precast & pipe plants.Capable of reclaiming 1/4 up to 1/2 yard-per-minute, the X1 SIX-SHOOTER is a cost-effective, affordable reclamation solution for the smaller operator.
Available in Left– or Right—Hand Sand Screw Discharge to fit your plant.
Optional Sand Screw Heater package, and Automatic Start/Stop also available. /Asset/BFK Model X1 Six Shooter Concrete Reclaimer 5.jpg
Model X2 Six-Shooter Concrete Reclaimer
The Model X2 Double-Wide SIX-SHOOTER Reclaimer is ideal for plants with lesser amounts of daily waste concrete, but still need the ability to wash-out 2 mixer trucks at once.
The Model X2 SIX-SHOOTER is capable of reclaiming from 1/4 to 1/2 yard-per-minute, making it as fast as many competitors largest machines!
Make sure to compare thru-put and No. of truck capabilities when comparing to competitive brands! Available in Left–or Right—Hand Sand Screw Discharge to fit your plant.
Optional Sand Screw Heater package, and Automatic Start/Stop also available.
/Asset/BFK Model X2 Six Shooter Concrete Reclaimer 2.jpg
Stephens Manufacturing Reclaimers
Stephens Mfg. has been building reclaimers for over 30 years. We have two different size classifiers and several different ways to handle the cement fines and waste water.
Both classifying units have special designed tail bearings that allow tail section of the screw to be lifted up for service and maintenance.
24" Reclaimer
A unique material reclaiming system for washing and separating coarse and fine aggregates for stock piling and re-use. The 24" ready mix reclaimer features separation of the coarse aggregates on a vibrating screen before processing the fines through the washing screw. Because course materials have a relatively small surface area per unit it is easy to wash with spray bars on a vibrating screen. The fine aggregates are conveyed to a different location for stock piling. Slurry water flows over adjustable weirs into settling ponds. The clarified water is recycled for washing out mixer truck.
The 24" model has poly-urethane replaceable shoes on the auger. The system uses a 4’ x 8’ vibrating screen. The classifier is 1000 gallons with a 24" auger. The collection hopper has two wash out stands for discharging two trucks at once. The unit includes a pump to recycle water, controls, starters and a main disconnect.
36" Reclaimer
The 36" ready mix reclaimer is a coarse and fine aggregate material reclaiming system. Reclaimed aggregates can be resold for fill material or washed, separated, and stock piled for re-use. Slurry water flows over adjustable weirs into settling ponds. The clarified water is recycled to wash out mixer trucks.
The 36" model has a 1200 gallon classifier and a 36" auger. The rock and sand are washed together and conveyed by auger. The 36" model has replaceable "cast" shoes, and the collection hopper has wash stands for washing three (3) trucks out at the same time. (Vibrating screen to separate rock and sand is optional.) The unit includes a pump to recycle water, controls, starters and a main disconnect.
Slurry Recovery
Pond system: A pond system can be set up to catch the waste water and slurry water. The first pond can be a slurry pit and two agitators can be installed to keep cement fines in suspension. Stephens can supply a "Ni-hard" slurry pump to send slurry water to the batch plant as batching water. System will include a "Density Cell"; it will measure the specific gravity of the slurry (within 1%). This will allow you to add water if necessary to protect the pumps, and help with precision batching. A 3" mag meter and a 3" badger fresh water meter, will also be included to accurately measure the amount of slurry and grey water pumped to plant. The system has an automatic back flush setting to flush out and clean the lines.
Underground Tanks: Underground storage tank 5500 gallons, constructed of 3/16" steel. Includes one 30" x 15’ agitator to keep cement fines in suspension. Heavy duty universal joint to allow one end of agitator to be elevated for service and maintenance. System will include a "Density Cell"; it will measure the specific gravity of the slurry (within 1%). This will allow you to add water if necessary to protect the pumps, and help with precision batching. A 3" mag meter and a 3" badger fresh water meter, will also be included to accurately measure the amount of slurry and grey water pumped to plant. The system has an automatic back flush setting to flush out and clean the lines.
/Asset/Stephens Reclaimer.jpg